[LinuxBIOS] badly initialized (?) pci bridge on the M57SLI (with irq table and mptable)
Ward Vandewege
ward at gnu.org
Wed Sep 19 23:29:52 CEST 2007
Hey Yinghai,
Did those boot logs tell you something that could help us?
Thanks,
Ward.
On Tue, Sep 18, 2007 at 03:07:53AM +0200, echelon at free.fr wrote:
> Hi,
> I answer on behalf of Ward.. (he owns a SPI revision of the ga-m57sli too but
> he hasn't an external spi programmer so he cannot do tests with LinuxBIOS yet..)
> So I attach 2 logs of LinuxBIOS + Linux boot:
> -1) vga_pci.txt => with a VGA PCI card
> -2) vga_pcie.txt => with a VGA PCIe card
> We can see that the PCI bridge (devicepath = 00.06.0) cannot detect any device
> plugged when scanning the secondary bus (contrary to the PCIe bridges which do
> the scan correctly).
> One last thing : unfortunately I managed to toast the SPI programmer that I
> manufactured myself so for the momment I have no mean to reflash the bios chip..
> :/
> I know that I should increase the level of logging in LB..
> I hope to fix this these days, and then more detailed logging I will send.
>
> Best regards, Florentin
>
> Quoting yhlu <yinghailu at gmail.com>:
>
> > On 9/17/07, Ward Vandewege <ward at gnu.org> wrote:
> > > I've attached that boot log to this message.
> >
> > the one without any vga card installed?
> >
> > Can you post one with pcie display card installed and the one with pci
> > display card installed?
> >
> > YH
> >
> > --
> > linuxbios mailing list
> > linuxbios at linuxbios.org
> > http://www.linuxbios.org/mailman/listinfo/linuxbios
> >
>
>
>
>
> !DSPAM:46ef16e5135875026718549!
>
>
> LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting...
> *sysinfo range: [000cf000,000cf730)
> bsp_apicid=00
> core0 started:
> started ap apicid: 01
> SBLink=00
> NC node|link=00
> begin msr fid, vid 31081212080c0202
> end msr fid, vid 31081208080c020c
> mcp55_num:01
> ht reset -
>
>
> LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting...
> *sysinfo range: [000cf000,000cf730)
> bsp_apicid=00
> core0 started:
> started ap apicid: 01
> SBLink=00
> NC node|link=00
> begin msr fid, vid 31081208080c020c
> end msr fid, vid 31081208080c020c
> mcp55_num:01
> Ram1.00
> Ram2.00
> Unbuffered
> 400Mhz
> Interleaved
> RAM: 0x00200000 KB
> Ram3
> dimm_mask = 00000011
> x4_mask = 00000000
> x16_mask = 00000000
> single_rank_mask = 00000000
> ODC = 00113222
> Addr Timing= 00202520
> Initializing memory: done
> Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
> set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=17 done
> set DQS timing:DQSPos: 00 done
> set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
> Total DQS Training : tsc [00]=00000000324fd022
> Total DQS Training : tsc [01]=00000000339fea67
> Total DQS Training : tsc [02]=0000000081e5a077
> Total DQS Training : tsc [03]=000000008303c357
> Ram4
> v_esp=000cee78
> testx = 5a5a5a5a
> Copying data from cache to RAM -- switching to use RAM as stack... Done
> testx = 5a5a5a5a
> Disabling cache as ram now
> Clearing initial memory region: Done
> Copying LinuxBIOS to RAM.
> src=fffdf000
> dst=00100000
> linxbios_ram.nrv2b length = 0000d667
> linxbios_ram.bin length = 000225d0
> Jumping to LinuxBIOS.
> LinuxBIOS-2.0.0_m57sli_Fallback mardi 11 septembre 2007, 12:45:25 (UTC+0200) booting...
> Enumerating buses...
> APIC_CLUSTER: 0 enabled
> PCI_DOMAIN: 0000 enabled
> PCI: 00:18.3 siblings=1
> CPU: APIC: 00 enabled
> CPU: APIC: 01 enabled
> PCI: pci_scan_bus for bus 00
> PCI: 00:18.0 [1022/1100] enabled
> PCI: 00:18.1 [1022/1101] enabled
> PCI: 00:18.2 [1022/1102] enabled
> PCI: 00:18.3 [1022/1103] enabled
> PCI: 00:00.0 [10de/0369] enabled
> PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
> PCI: pci_scan_bus for bus 00
> PCI: 00:00.0 [10de/0369] enabled
> PCI: 00:01.0 [10de/0360] enabled
> PCI: 00:01.1 [10de/0368] enabled
> PCI: 00:01.2 [10de/036a] enabled
> PCI: 00:01.3 [10de/036b] enabled
> PCI: 00:02.0 [10de/036c] enabled
> PCI: 00:02.1 [10de/036d] enabled
> PCI: 00:04.0 [10de/036e] enabled
> PCI: 00:05.0 [10de/037f] enabled
> PCI: 00:05.1 [10de/037f] enabled
> PCI: 00:05.2 [10de/037f] enabled
> PCI: 00:06.0 [10de/0370] enabled
> PCI: 00:06.1 [10de/0371] enabled
> PCI: 00:08.0 [10de/0373] enabled
> PCI: 00:0a.0 [10de/0376] enabled
> PCI: 00:0b.0 [10de/0374] enabled
> PCI: 00:0c.0 [10de/0374] enabled
> PCI: 00:0d.0 [10de/0378] enabled
> PCI: 00:0e.0 [10de/0375] enabled
> PCI: 00:0f.0 [10de/0377] enabled
> PNP: 002e.0 disabled
> PNP: 002e.1 enabled
> PNP: 002e.2 disabled
> PNP: 002e.3 disabled
> PNP: 002e.4 enabled
> PNP: 002e.5 enabled
> PNP: 002e.6 enabled
> PNP: 002e.8 disabled
> PNP: 002e.9 disabled
> PNP: 002e.a disabled
> smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
> smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
> PCI: pci_scan_bus for bus 01
> PCI: pci_scan_bus returning with max=001
> PCI: pci_scan_bus for bus 02
> PCI: pci_scan_bus returning with max=002
> PCI: pci_scan_bus for bus 03
> PCI: pci_scan_bus returning with max=003
> PCI: pci_scan_bus for bus 04
> PCI: pci_scan_bus returning with max=004
> PCI: pci_scan_bus for bus 05
> PCI: pci_scan_bus returning with max=005
> PCI: pci_scan_bus for bus 06
> PCI: pci_scan_bus returning with max=006
> PCI: pci_scan_bus for bus 07
> PCI: pci_scan_bus returning with max=007
> PCI: pci_scan_bus returning with max=007
> PCI: pci_scan_bus returning with max=007
> done
> Allocating resources...
> Reading resources...
> PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
> PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
> PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
> PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
> PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
> PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
> PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
> PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
> PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
> PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
> PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
> PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
> PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
> PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
> PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
> PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
> PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
> PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
> PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
> PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
> PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
> Done reading resources.
> Setting resources...
> PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000002fff] io <node 0 link 0>
> PCI: 00:18.0 1b8 <- [0x00fc100000 - 0x00fc0fffff] prefmem <node 0 link 0>
> PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc0fffff] mem <node 0 link 0>
> PCI: 00:01.0 14 <- [0x00fc044000 - 0x00fc044fff] mem
> PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
> PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
> PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io
> PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io
> PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq
> PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
> PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
> PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
> PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
> PCI: 00:01.1 10 <- [0x0000001c00 - 0x0000001c3f] io
> PCI: 00:01.1 20 <- [0x0000001c40 - 0x0000001c7f] io
> PCI: 00:01.1 24 <- [0x0000001c80 - 0x0000001cbf] io
> PCI: 00:01.1 60 <- [0x0000001000 - 0x00000010ff] io
> PCI: 00:01.1 64 <- [0x0000001400 - 0x00000014ff] io
> PCI: 00:01.1 68 <- [0x0000001800 - 0x00000018ff] io
> PCI: 00:01.3 10 <- [0x00fc000000 - 0x00fc03ffff] mem
> PCI: 00:02.0 10 <- [0x00fc045000 - 0x00fc045fff] mem
> PCI: 00:02.1 10 <- [0x00fc04a000 - 0x00fc04a0ff] mem
> PCI: 00:04.0 20 <- [0x0000001cc0 - 0x0000001ccf] io
> PCI: 00:05.0 10 <- [0x0000002000 - 0x0000002007] io
> PCI: 00:05.0 14 <- [0x0000002070 - 0x0000002073] io
> PCI: 00:05.0 18 <- [0x0000002010 - 0x0000002017] io
> PCI: 00:05.0 1c <- [0x0000002080 - 0x0000002083] io
> PCI: 00:05.0 20 <- [0x0000001cd0 - 0x0000001cdf] io
> PCI: 00:05.0 24 <- [0x00fc046000 - 0x00fc046fff] mem
> PCI: 00:05.1 10 <- [0x0000002020 - 0x0000002027] io
> PCI: 00:05.1 14 <- [0x0000002090 - 0x0000002093] io
> PCI: 00:05.1 18 <- [0x0000002030 - 0x0000002037] io
> PCI: 00:05.1 1c <- [0x00000020a0 - 0x00000020a3] io
> PCI: 00:05.1 20 <- [0x0000001ce0 - 0x0000001cef] io
> PCI: 00:05.1 24 <- [0x00fc047000 - 0x00fc047fff] mem
> PCI: 00:05.2 10 <- [0x0000002040 - 0x0000002047] io
> PCI: 00:05.2 14 <- [0x00000020b0 - 0x00000020b3] io
> PCI: 00:05.2 18 <- [0x0000002050 - 0x0000002057] io
> PCI: 00:05.2 1c <- [0x00000020c0 - 0x00000020c3] io
> PCI: 00:05.2 20 <- [0x0000001cf0 - 0x0000001cff] io
> PCI: 00:05.2 24 <- [0x00fc048000 - 0x00fc048fff] mem
> PCI: 00:06.1 10 <- [0x00fc040000 - 0x00fc043fff] mem
> PCI: 00:08.0 10 <- [0x00fc049000 - 0x00fc049fff] mem
> PCI: 00:08.0 14 <- [0x0000002060 - 0x0000002067] io
> PCI: 00:08.0 18 <- [0x00fc04b000 - 0x00fc04b0ff] mem
> PCI: 00:08.0 1c <- [0x00fc04c000 - 0x00fc04c00f] mem
> PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
> Done setting resources.
> Done allocating resources.
> Enabling resources...
> PCI: 00:18.0 cmd <- 140
> PCI: 00:00.0 subsystem <- 1022/2b80
> PCI: 00:00.0 cmd <- 146
> PCI: 00:01.0 subsystem <- 1022/2b80
> PCI: 00:01.0 cmd <- 14f
> mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
> mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
> mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
> mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
> mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
> PCI: 00:01.1 subsystem <- 1022/2b80
> PCI: 00:01.1 cmd <- 141
> PCI: 00:01.2 cmd <- 540
> PCI: 00:01.3 cmd <- 142
> PCI: 00:02.0 subsystem <- 1022/2b80
> PCI: 00:02.0 cmd <- 142
> PCI: 00:02.1 subsystem <- 1022/2b80
> PCI: 00:02.1 cmd <- 142
> PCI: 00:04.0 subsystem <- 1022/2b80
> PCI: 00:04.0 cmd <- 141
> PCI: 00:05.0 subsystem <- 1022/2b80
> PCI: 00:05.0 cmd <- 143
> PCI: 00:05.1 subsystem <- 1022/2b80
> PCI: 00:05.1 cmd <- 143
> PCI: 00:05.2 subsystem <- 1022/2b80
> PCI: 00:05.2 cmd <- 143
> PCI: 00:06.0 bridge ctrl <- 0a03
> PCI: 00:06.0 cmd <- 144
> PCI: 00:06.1 subsystem <- 1022/2b80
> PCI: 00:06.1 cmd <- 142
> PCI: 00:08.0 subsystem <- 1022/2b80
> PCI: 00:08.0 cmd <- 143
> PCI: 00:0a.0 bridge ctrl <- 0003
> PCI: 00:0a.0 cmd <- 140
> PCI: 00:0b.0 bridge ctrl <- 0003
> PCI: 00:0b.0 cmd <- 140
> PCI: 00:0c.0 bridge ctrl <- 0003
> PCI: 00:0c.0 cmd <- 140
> PCI: 00:0d.0 bridge ctrl <- 0003
> PCI: 00:0d.0 cmd <- 140
> PCI: 00:0e.0 bridge ctrl <- 0003
> PCI: 00:0e.0 cmd <- 140
> PCI: 00:0f.0 bridge ctrl <- 0003
> PCI: 00:0f.0 cmd <- 140
> PCI: 00:18.1 subsystem <- 1022/2b80
> PCI: 00:18.1 cmd <- 140
> PCI: 00:18.2 subsystem <- 1022/2b80
> PCI: 00:18.2 cmd <- 140
> PCI: 00:18.3 cmd <- 140
> done.
> Initializing devices...
> Root Device init
> APIC_CLUSTER: 0 init
> start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
> Initializing CPU #0
> CPU: vendor AMD device 40fb2
> CPU: family 0f, model 4b, stepping 02
> Enabling cache
>
> Setting fixed MTRRs(0-88) type: UC
> Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
> Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
> DONE fixed MTRRs
> Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
> DONE variable MTRRs
> Clear out the extra MTRR's
>
> MTRR check
> Fixed MTRRs : Enabled
> Variable MTRRs: Enabled
>
> CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
> Setting up local apic... apic_id: 0x00 done.
> ECC Disabled
> CPU #0 Initialized
> Initializing CPU #1
> Waiting for 1 CPUS to stop
> CPU: vendor AMD device 40fb2
> CPU: family 0f, model 4b, stepping 02
> Enabling cache
>
> Setting fixed MTRRs(0-88) type: UC
> Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
> Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
> DONE fixed MTRRs
> Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
> DONE variable MTRRs
> Clear out the extra MTRR's
>
> MTRR check
> Fixed MTRRs : Enabled
> Variable MTRRs: Enabled
>
> CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
> Setting up local apic... apic_id: 0x01 done.
> CPU #1 Initialized
> All AP CPUs stopped
> PCI: 00:18.0 init
> PCI: 00:01.0 init
> set power on after power fail
> RTC Init
> Invalid CMOS LB checksum
> PNP: 002e.1 init
> PNP: 002e.4 init
> FAN_CTL: reg = 0x02a9, read value = 0x50
> FAN_CTL: reg = 0x02a9, writing value = 0xd7
> PNP: 002e.5 init
> Keyboard selftest failed
> PNP: 002e.6 init
> PCI: 00:01.1 init
> PCI: 00:02.1 init
> PCI: 00:04.0 init
> IDE0
> PCI: 00:05.0 init
> SATA S SATA P
> PCI: 00:05.1 init
> SATA S SATA P
> PCI: 00:05.2 init
> SATA S SATA P
> PCI: 00:06.0 init
> dev_root mem base = 0x00f8000000
> [0x50] <-- 0xf8000000
> PCI: 00:06.1 init
> base = fc040000
> codec_mask = 01
> codec viddid: 10ec0888
> No verb!
> PCI: 00:08.0 init
> MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
> PCI: 00:0a.0 init
> PCI: 00:0b.0 init
> PCI: 00:0c.0 init
> PCI: 00:0d.0 init
> PCI: 00:0e.0 init
> PCI: 00:0f.0 init
> PCI: 00:18.1 init
> PCI: 00:18.2 init
> PCI: 00:18.3 init
> NB: Function 3 Misc Control.. done.
> PCI: 00:01.2 init
> PCI: 00:01.3 init
> Devices initialized
> Writing IRQ routing tables to 0xf0000...done.
> Wrote the mp table end at: 00000020 - 00000274
> Moving GDT to 0x500...ok
> Adjust low_table_end from 0x00000530 to 0x00001000
> Adjust rom_table_end from 0x000f0400 to 0x00100000
> Wrote linuxbios table at: 00000530 - 00000de8 checksum 8b7b
>
> Welcome to elfboot, the open sourced starter.
> January 2002, Eric Biederman.
> Version 1.3
>
> rom_stream: 0xfffc0000 - 0xfffdefff
> Found ELF candidate at offset 0
> header_offset is 0
> Try to load at offset 0x0
> New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08
> (cleaned up) New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08
> New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48
> (cleaned up) New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48
> Dropping non PT_LOAD segment
> Dropping non PT_LOAD segment
> Loading Segment: addr: 0x000000007ff80000 memsz: 0x000000000003cd20 filesz: 0x0000000000012d08
> Clearing Segment: addr: 0x000000007ff92d08 memsz: 0x000000000002a018
> Loading Segment: addr: 0x000000007ffbcd20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
> Jumping to boot code at 0x10e4fc
> FILO version 0.5 (goldorak at vega) Mon Jul 30 12:17:14 CEST 2007
> menu: hda3:/boot/filo/menu.lst
> hda: LBA 40GB: ST340016A
> Mounted ext2fs
> Mounted ext2fs
> Found Linux version 2.6.20-15-generic (root at yellow) #2 SMP Sun Apr 15 06:17:24 UTC 2007 bzImage.
> Loading kernel... ok
> Loading initrd... ok
> Jumping to entry point...
> [ 0.000000] Linux version 2.6.20-15-generic (root at yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
> [ 0.000000] Command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
> [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
> [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
> [ 0.000000] PCI: Unknown option `nobios'
> [ 0.000000] end_pfn_map = 524288
> [ 0.000000] DMI not present or invalid.
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] Number of nodes 1
> [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000
> [ 0.000000] Using node hash shift of 63
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 1 -> 4096
> [ 0.000000] DMA32 4096 -> 1048576
> [ 0.000000] Normal 1048576 -> 1048576
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 1 -> 160
> [ 0.000000] 0: 192 -> 240
> [ 0.000000] 0: 256 -> 524288
> [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
> [ 0.000000] If you got timer trouble try acpi_use_timer_override
> [ 0.000000] Intel MultiProcessor Specification v1.4
> [ 0.000000] MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000
> [ 0.000000] Processor #0 (Bootup-CPU)
> [ 0.000000] Processor #1
> [ 0.000000] I/O APIC #2 at 0xFC044000.
> [ 0.000000] Setting APIC routing to physical flat
> [ 0.000000] Processors: 2
> [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000c0000
> [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
> [ 0.000000] Built 1 zonelists. Total pages: 515988
> [ 0.000000] Kernel command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 16.310356] Console: colour dummy device 80x25
> [ 16.527121] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 16.535478] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 16.542962] Checking aperture...
> [ 16.546208] CPU 0: aperture @ f8000000 size 64 MB
> [ 16.566402] Memory: 2053392k/2097152k available (2217k kernel code, 43564k reserved, 1162k data, 304k init)
> [ 16.655361] Calibrating delay using timer specific routine.. 4007.32 BogoMIPS (lpj=8014644)
> [ 16.663783] Security Framework v1.0.0 initialized
> [ 16.668494] SELinux: Disabled at boot.
> [ 16.672353] Mount-cache hash table entries: 256
> [ 16.677008] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 16.684140] CPU: L2 Cache: 512K (64 bytes/line)
> [ 16.688671] CPU 0/0 -> Node 0
> [ 16.691647] CPU: Physical Processor ID: 0
> [ 16.695661] CPU: Processor Core ID: 0
> [ 16.699346] SMP alternatives: switching to UP code
> [ 16.704355] Early unpacking initramfs... done
> [ 17.069699] Using local APIC timer interrupts.
> [ 17.124046] result 12500062
> [ 17.126837] Detected 12.500 MHz APIC timer.
> [ 17.134650] SMP alternatives: switching to SMP code
> [ 17.139627] Booting processor 1/2 APIC 0x1
> [ 17.153980] Initializing CPU#1
> [ 17.234255] Calibrating delay using timer specific routine.. 4000.37 BogoMIPS (lpj=8000755)
> [ 17.234262] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 17.234264] CPU: L2 Cache: 512K (64 bytes/line)
> [ 17.234266] CPU 1/1 -> Node 0
> [ 17.234268] CPU: Physical Processor ID: 0
> [ 17.234269] CPU: Processor Core ID: 1
> [ 17.234346] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
> [ 17.238250] CPU 1: Syncing TSC to CPU 0.
> [ 17.238345] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 522 cycles)
> [ 17.238356] Brought up 2 CPUs
> [ 17.293297] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
> [ 17.299556] time.c: Detected 2000.010 MHz processor.
> [ 17.944666] migration_cost=161
> [ 17.948088] Time: 7:28:36 Date: 08/18/107
> [ 17.952312] NET: Registered protocol family 16
> [ 17.957127] PCI: Using configuration type 1
> [ 17.961839] ACPI: Interpreter disabled.
> [ 17.965686] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 17.971346] pnp: PnP ACPI: disabled
> [ 17.974886] PCI: Probing PCI hardware
> [ 17.980276] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
> [ 17.986745] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
> [ 17.992577] PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10
> [ 17.998403] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22
> [ 18.004234] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23
> [ 18.010064] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20
> [ 18.015894] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23
> [ 18.021724] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21
> [ 18.027554] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23
> [ 18.033382] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22
> [ 18.039279] NET: Registered protocol family 8
> [ 18.043633] NET: Registered protocol family 20
> [ 18.048460] PCI: Bridge: 0000:00:06.0
> [ 18.052129] IO window: disabled.
> [ 18.055553] MEM window: disabled.
> [ 18.059057] PREFETCH window: disabled.
> [ 18.062983] PCI: Bridge: 0000:00:0a.0
> [ 18.066649] IO window: disabled.
> [ 18.070057] MEM window: disabled.
> [ 18.073553] PREFETCH window: disabled.
> [ 18.077479] PCI: Bridge: 0000:00:0b.0
> [ 18.081144] IO window: disabled.
> [ 18.084538] MEM window: disabled.
> [ 18.088031] PREFETCH window: disabled.
> [ 18.091959] PCI: Bridge: 0000:00:0c.0
> [ 18.095625] IO window: disabled.
> [ 18.099034] MEM window: disabled.
> [ 18.102528] PREFETCH window: disabled.
> [ 18.106456] PCI: Bridge: 0000:00:0d.0
> [ 18.110122] IO window: disabled.
> [ 18.113532] MEM window: disabled.
> [ 18.117025] PREFETCH window: disabled.
> [ 18.120954] PCI: Bridge: 0000:00:0e.0
> [ 18.124620] IO window: disabled.
> [ 18.128018] MEM window: disabled.
> [ 18.131504] PREFETCH window: disabled.
> [ 18.135433] PCI: Bridge: 0000:00:0f.0
> [ 18.139099] IO window: disabled.
> [ 18.142508] MEM window: disabled.
> [ 18.146002] PREFETCH window: disabled.
> [ 18.150011] NET: Registered protocol family 2
> [ 18.192452] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 18.199898] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> [ 18.209113] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 18.216250] TCP: Hash tables configured (established 262144 bind 65536)
> [ 18.222859] TCP reno registered
> [ 18.236423] checking if image is initramfs... it is
> [ 18.844999] Freeing initrd memory: 7303k freed
> [ 18.853158] audit: initializing netlink socket (disabled)
> [ 18.858557] audit(1190100516.184:1): initialized
> [ 18.863311] VFS: Disk quotas dquot_6.5.1
> [ 18.867246] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 18.873734] io scheduler noop registered
> [ 18.877673] io scheduler anticipatory registered
> [ 18.882303] io scheduler deadline registered
> [ 18.886594] io scheduler cfq registered (default)
> [ 18.891589] assign_interrupt_mode Found MSI capability
> [ 18.896799] assign_interrupt_mode Found MSI capability
> [ 18.902009] assign_interrupt_mode Found MSI capability
> [ 18.907215] assign_interrupt_mode Found MSI capability
> [ 18.912418] assign_interrupt_mode Found MSI capability
> [ 18.917616] assign_interrupt_mode Found MSI capability
> [ 18.944799] Real Time Clock Driver v1.12ac
> [ 18.948959] Linux agpgart interface v0.102 (c) Dave Jones
> [ 18.954348] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 18.962183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 18.968587] mice: PS/2 mouse device common for all mice
> [ 18.974292] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [ 18.981976] input: Macintosh mouse button emulation as /class/input/input0
> [ 18.988864] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 18.995202] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 19.003427] PNP: No PS/2 controller found. Probing ports directly.
> [ 19.009864] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 19.014848] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 19.019982] TCP cubic registered
> [ 19.023227] NET: Registered protocol family 1
> [ 19.027622] Magic number: 7:38:471
> [ 19.031312] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> [ 19.037640] Freeing unused kernel memory: 304k freed
> Loading, please wait...
> [ 19.063552] input: AT Translated Set 2 keyboard as /class/input/input1
> Begin: Loading essential drivers... ...
> [ 19.189004] Capability LSM initialized
> Done.
> Begin: Running /scripts/init-premount ...
> [ 19.250848] thermal: Unknown symbol acpi_processor_set_thermal_limit
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Begin: Waiting for root file system... ...
> [ 19.663314] usbcore: registered new interface driver usbfs
> [ 19.668861] usbcore: registered new interface driver hub
> [ 19.674250] usbcore: registered new device driver usb
> [ 19.685154] SCSI subsystem initialized
> [ 19.702335] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 19.707695] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> [ 19.715175] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc045000
> [ 19.720933] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
> [ 19.779417] usb usb1: configuration #1 chosen from 1 choice
> [ 19.785088] hub 1-0:1.0: USB hub found
> [ 19.788883] hub 1-0:1.0: 10 ports detected
> [ 19.897990] forcedeth: using HIGHDMA
> [ 20.200463] usb 1-8: new low speed USB device using ohci_hcd and address 2
> [ 20.423100] usb 1-8: configuration #1 chosen from 1 choice
> [ 20.424336] eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
> [ 20.435626] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 20.441008] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
> [ 20.448473] ehci_hcd 0000:00:02.1: debug port 1
> [ 20.453075] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfc04a000
> [ 20.458783] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 20.466369] usb 1-8: USB disconnect, address 2
> [ 20.471006] usb usb2: configuration #1 chosen from 1 choice
> [ 20.476644] hub 2-0:1.0: USB hub found
> [ 20.480408] hub 2-0:1.0: 10 ports detected
> [ 20.591774] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
> [ 20.597942] NFORCE-MCP55: chipset revision 161
> [ 20.602418] NFORCE-MCP55: not 100% native mode: will probe irqs later
> [ 20.608891] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
> [ 20.615132] ide0: BM-DMA at 0x1cc0-0x1cc7, BIOS settings: hda:pio, hdb:pio
> [ 20.783342] usbcore: registered new interface driver hiddev
> [ 20.911244] hda: ST340016A, ATA DISK drive
> [ 21.086725] usb 1-8: new low speed USB device using ohci_hcd and address 3
> [ 21.309369] usb 1-8: configuration #1 chosen from 1 choice
> [ 21.323357] input: PS/2+USB Mouse as /class/input/input2
> [ 21.328753] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-8
> [ 21.336015] usbcore: registered new interface driver usbhid
> [ 21.341624] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [ 21.590100] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 21.594866] ata1: SATA max UDMA/133 cmd 0x0000000000012000 ctl 0x0000000000012072 bmdma 0x0000000000011cd0 irq 20
> [ 21.605248] ata2: SATA max UDMA/133 cmd 0x0000000000012010 ctl 0x0000000000012082 bmdma 0x0000000000011cd8 irq 20
> [ 21.615594] scsi0 : sata_nv
> [ 21.933068] ata1: SATA link down (SStatus 0 SControl 300)
> [ 21.948773] ATA: abnormal status 0x7F on port 0x0000000000012007
> [ 21.954839] scsi1 : sata_nv
> [ 22.272404] ata2: SATA link down (SStatus 0 SControl 300)
> [ 22.288127] ATA: abnormal status 0x7F on port 0x0000000000012017
> [ 22.294270] ata3: SATA max UDMA/133 cmd 0x0000000000012020 ctl 0x0000000000012092 bmdma 0x0000000000011ce0 irq 23
> [ 22.304647] ata4: SATA max UDMA/133 cmd 0x0000000000012030 ctl 0x00000000000120a2 bmdma 0x0000000000011ce8 irq 23
> [ 22.314984] scsi2 : sata_nv
> [ 22.631703] ata3: SATA link down (SStatus 0 SControl 300)
> [ 22.647430] ATA: abnormal status 0x7F on port 0x0000000000012027
> [ 22.653487] scsi3 : sata_nv
> [ 22.971040] ata4: SATA link down (SStatus 0 SControl 300)
> [ 22.986758] ATA: abnormal status 0x7F on port 0x0000000000012037
> [ 22.992877] ata5: SATA max UDMA/133 cmd 0x0000000000012040 ctl 0x00000000000120b2 bmdma 0x0000000000011cf0 irq 21
> [ 23.003249] ata6: SATA max UDMA/133 cmd 0x0000000000012050 ctl 0x00000000000120c2 bmdma 0x0000000000011cf8 irq 21
> [ 23.013592] scsi4 : sata_nv
> [ 23.330339] ata5: SATA link down (SStatus 0 SControl 300)
> [ 23.346043] ATA: abnormal status 0x7F on port 0x0000000000012047
> [ 23.352107] scsi5 : sata_nv
> [ 23.669676] ata6: SATA link down (SStatus 0 SControl 300)
> [ 23.685381] ATA: abnormal status 0x7F on port 0x0000000000012057
> [ 23.704965] hda: max request size: 128KiB
> [ 23.709403] hda: Host Protected Area detected.
> [ 23.709405] current capacity is 78163247 sectors (40019 MB)
> [ 23.709406] native capacity is 78165360 sectors (40020 MB)
> [ 23.725699] hda: Host Protected Area disabled.
> [ 23.730216] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
> [ 23.738343] hda: cache flushes not supported
> [ 23.742695] hda: hda1 hda2 hda3
> Done.
>
>
> LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting...
> *sysinfo range: [000cf000,000cf730)
> bsp_apicid=00
> core0 started:
> started ap apicid: 01
> SBLink=00
> NC node|link=00
> begin msr fid, vid 31081212080c0202
> end msr fid, vid 31081208080c020c
> mcp55_num:01
> ht reset -
>
>
> LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting...
> *sysinfo range: [000cf000,000cf730)
> bsp_apicid=00
> core0 started:
> started ap apicid: 01
> SBLink=00
> NC node|link=00
> begin msr fid, vid 31081208080c020c
> end msr fid, vid 31081208080c020c
> mcp55_num:01
> Ram1.00
> Ram2.00
> Unbuffered
> 400Mhz
> Interleaved
> RAM: 0x00200000 KB
> Ram3
> dimm_mask = 00000011
> x4_mask = 00000000
> x16_mask = 00000000
> single_rank_mask = 00000000
> ODC = 00113222
> Addr Timing= 00202520
> Initializing memory: done
> Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
> set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=18 done
> set DQS timing:DQSPos: 00 done
> set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2d done
> Total DQS Training : tsc [00]=00000000324ec478
> Total DQS Training : tsc [01]=0000000033a0712d
> Total DQS Training : tsc [02]=0000000082211e65
> Total DQS Training : tsc [03]=00000000833e42f5
> Ram4
> v_esp=000cee78
> testx = 5a5a5a5a
> Copying data from cache to RAM -- switching to use RAM as stack... Done
> testx = 5a5a5a5a
> Disabling cache as ram now
> Clearing initial memory region: Done
> Copying LinuxBIOS to RAM.
> src=fffdf000
> dst=00100000
> linxbios_ram.nrv2b length = 0000d667
> linxbios_ram.bin length = 000225d0
> Jumping to LinuxBIOS.
> LinuxBIOS-2.0.0_m57sli_Fallback mardi 11 septembre 2007, 12:45:25 (UTC+0200) booting...
> Enumerating buses...
> APIC_CLUSTER: 0 enabled
> PCI_DOMAIN: 0000 enabled
> PCI: 00:18.3 siblings=1
> CPU: APIC: 00 enabled
> CPU: APIC: 01 enabled
> PCI: pci_scan_bus for bus 00
> PCI: 00:18.0 [1022/1100] enabled
> PCI: 00:18.1 [1022/1101] enabled
> PCI: 00:18.2 [1022/1102] enabled
> PCI: 00:18.3 [1022/1103] enabled
> PCI: 00:00.0 [10de/0369] enabled
> PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
> PCI: pci_scan_bus for bus 00
> PCI: 00:00.0 [10de/0369] enabled
> PCI: 00:01.0 [10de/0360] enabled
> PCI: 00:01.1 [10de/0368] enabled
> PCI: 00:01.2 [10de/036a] enabled
> PCI: 00:01.3 [10de/036b] enabled
> PCI: 00:02.0 [10de/036c] enabled
> PCI: 00:02.1 [10de/036d] enabled
> PCI: 00:04.0 [10de/036e] enabled
> PCI: 00:05.0 [10de/037f] enabled
> PCI: 00:05.1 [10de/037f] enabled
> PCI: 00:05.2 [10de/037f] enabled
> PCI: 00:06.0 [10de/0370] enabled
> PCI: 00:06.1 [10de/0371] enabled
> PCI: 00:08.0 [10de/0373] enabled
> PCI: 00:0a.0 [10de/0376] enabled
> PCI: 00:0b.0 [10de/0374] enabled
> PCI: 00:0c.0 [10de/0374] enabled
> PCI: 00:0d.0 [10de/0378] enabled
> PCI: 00:0e.0 [10de/0375] enabled
> PCI: 00:0f.0 [10de/0377] enabled
> PNP: 002e.0 disabled
> PNP: 002e.1 enabled
> PNP: 002e.2 disabled
> PNP: 002e.3 disabled
> PNP: 002e.4 enabled
> PNP: 002e.5 enabled
> PNP: 002e.6 enabled
> PNP: 002e.8 disabled
> PNP: 002e.9 disabled
> PNP: 002e.a disabled
> smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
> smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
> smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
> PCI: pci_scan_bus for bus 01
> PCI: pci_scan_bus returning with max=001
> PCI: pci_scan_bus for bus 02
> PCI: pci_scan_bus returning with max=002
> PCI: pci_scan_bus for bus 03
> PCI: pci_scan_bus returning with max=003
> PCI: pci_scan_bus for bus 04
> PCI: pci_scan_bus returning with max=004
> PCI: pci_scan_bus for bus 05
> PCI: pci_scan_bus returning with max=005
> PCI: pci_scan_bus for bus 06
> PCI: pci_scan_bus returning with max=006
> PCI: pci_scan_bus for bus 07
> PCI: 07:00.0 [1002/71c2] enabled
> PCI: 07:00.1 [1002/71e2] enabled
> PCI: pci_scan_bus returning with max=007
> PCI: pci_scan_bus returning with max=007
> PCI: pci_scan_bus returning with max=007
> done
> Allocating resources...
> Reading resources...
> PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
> PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
> PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
> PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
> PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
> PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
> PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
> PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
> PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
> PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
> PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
> PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
> PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
> PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
> PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
> PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
> PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
> PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
> Done reading resources.
> Allocating VGA resource PCI: 07:00.0
> Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0
> Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
> Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
> Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
> Setting resources...
> VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
> PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
> PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
> PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f41fffff] mem <node 0 link 0>
> PCI: 00:01.0 14 <- [0x00f4144000 - 0x00f4144fff] mem
> PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
> PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
> PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io
> PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io
> PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq
> PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
> PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
> PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
> PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
> PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
> PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
> PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
> PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
> PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
> PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
> PCI: 00:01.3 10 <- [0x00f4100000 - 0x00f413ffff] mem
> PCI: 00:02.0 10 <- [0x00f4145000 - 0x00f4145fff] mem
> PCI: 00:02.1 10 <- [0x00f414a000 - 0x00f414a0ff] mem
> PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
> PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
> PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
> PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
> PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
> PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
> PCI: 00:05.0 24 <- [0x00f4146000 - 0x00f4146fff] mem
> PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
> PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
> PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
> PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
> PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
> PCI: 00:05.1 24 <- [0x00f4147000 - 0x00f4147fff] mem
> PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
> PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
> PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
> PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
> PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
> PCI: 00:05.2 24 <- [0x00f4148000 - 0x00f4148fff] mem
> PCI: 00:06.1 10 <- [0x00f4140000 - 0x00f4143fff] mem
> PCI: 00:08.0 10 <- [0x00f4149000 - 0x00f4149fff] mem
> PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
> PCI: 00:08.0 18 <- [0x00f414b000 - 0x00f414b0ff] mem
> PCI: 00:08.0 1c <- [0x00f414c000 - 0x00f414c00f] mem
> PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io
> PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem
> PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f40fffff] bus 07 mem
> PCI: 07:00.0 10 <- [0x00e0000000 - 0x00efffffff] prefmem64
> PCI: 07:00.0 18 <- [0x00f4020000 - 0x00f402ffff] mem64
> PCI: 07:00.0 20 <- [0x0000001000 - 0x00000010ff] io
> PCI: 07:00.0 30 <- [0x00f4000000 - 0x00f401ffff] romem
> PCI: 07:00.1 10 <- [0x00f4030000 - 0x00f403ffff] mem64
> PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
> Done setting resources.
> Done allocating resources.
> Enabling resources...
> PCI: 00:18.0 cmd <- 140
> PCI: 00:00.0 subsystem <- 1022/2b80
> PCI: 00:00.0 cmd <- 146
> PCI: 00:01.0 subsystem <- 1022/2b80
> PCI: 00:01.0 cmd <- 14f
> mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
> mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
> mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
> mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
> mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
> PCI: 00:01.1 subsystem <- 1022/2b80
> PCI: 00:01.1 cmd <- 141
> PCI: 00:01.2 cmd <- 540
> PCI: 00:01.3 cmd <- 142
> PCI: 00:02.0 subsystem <- 1022/2b80
> PCI: 00:02.0 cmd <- 142
> PCI: 00:02.1 subsystem <- 1022/2b80
> PCI: 00:02.1 cmd <- 142
> PCI: 00:04.0 subsystem <- 1022/2b80
> PCI: 00:04.0 cmd <- 141
> PCI: 00:05.0 subsystem <- 1022/2b80
> PCI: 00:05.0 cmd <- 143
> PCI: 00:05.1 subsystem <- 1022/2b80
> PCI: 00:05.1 cmd <- 143
> PCI: 00:05.2 subsystem <- 1022/2b80
> PCI: 00:05.2 cmd <- 143
> PCI: 00:06.0 bridge ctrl <- 0a03
> PCI: 00:06.0 cmd <- 144
> PCI: 00:06.1 subsystem <- 1022/2b80
> PCI: 00:06.1 cmd <- 142
> PCI: 00:08.0 subsystem <- 1022/2b80
> PCI: 00:08.0 cmd <- 143
> PCI: 00:0a.0 bridge ctrl <- 0003
> PCI: 00:0a.0 cmd <- 140
> PCI: 00:0b.0 bridge ctrl <- 0003
> PCI: 00:0b.0 cmd <- 140
> PCI: 00:0c.0 bridge ctrl <- 0003
> PCI: 00:0c.0 cmd <- 140
> PCI: 00:0d.0 bridge ctrl <- 0003
> PCI: 00:0d.0 cmd <- 140
> PCI: 00:0e.0 bridge ctrl <- 0003
> PCI: 00:0e.0 cmd <- 140
> PCI: 00:0f.0 bridge ctrl <- 000b
> PCI: 00:0f.0 cmd <- 147
> PCI: 07:00.0 cmd <- 143
> PCI: 07:00.1 cmd <- 142
> PCI: 00:18.1 subsystem <- 1022/2b80
> PCI: 00:18.1 cmd <- 140
> PCI: 00:18.2 subsystem <- 1022/2b80
> PCI: 00:18.2 cmd <- 140
> PCI: 00:18.3 cmd <- 140
> done.
> Initializing devices...
> Root Device init
> APIC_CLUSTER: 0 init
> start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
> Initializing CPU #0
> CPU: vendor AMD device 40fb2
> CPU: family 0f, model 4b, stepping 02
> Enabling cache
>
> Setting fixed MTRRs(0-88) type: UC
> Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
> Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
> DONE fixed MTRRs
> Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
> DONE variable MTRRs
> Clear out the extra MTRR's
>
> MTRR check
> Fixed MTRRs : Enabled
> Variable MTRRs: Enabled
>
> CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
> Setting up local apic... apic_id: 0x00 done.
> ECC Disabled
> CPU #0 Initialized
> Initializing CPU #1
> Waiting for 1 CPUS to stop
> CPU: vendor AMD device 40fb2
> CPU: family 0f, model 4b, stepping 02
> Enabling cache
>
> Setting fixed MTRRs(0-88) type: UC
> Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
> Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
> DONE fixed MTRRs
> Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
> DONE variable MTRRs
> Clear out the extra MTRR's
>
> MTRR check
> Fixed MTRRs : Enabled
> Variable MTRRs: Enabled
>
> CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
> Setting up local apic... apic_id: 0x01 done.
> CPU #1 Initialized
> All AP CPUs stopped
> PCI: 00:18.0 init
> PCI: 00:01.0 init
> set power on after power fail
> RTC Init
> Invalid CMOS LB checksum
> PNP: 002e.1 init
> PNP: 002e.4 init
> FAN_CTL: reg = 0x02a9, read value = 0x50
> FAN_CTL: reg = 0x02a9, writing value = 0xd7
> PNP: 002e.5 init
> Keyboard selftest failed
> PNP: 002e.6 init
> PCI: 00:01.1 init
> PCI: 00:02.1 init
> PCI: 00:04.0 init
> IDE0
> PCI: 00:05.0 init
> SATA S SATA P
> PCI: 00:05.1 init
> SATA S SATA P
> PCI: 00:05.2 init
> SATA S SATA P
> PCI: 00:06.0 init
> dev_root mem base = 0x00e0000000
> [0x50] <-- 0xe0000000
> PCI: 00:06.1 init
> base = f4140000
> codec_mask = 01
> codec viddid: 10ec0888
> No verb!
> PCI: 00:08.0 init
> MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
> PCI: 00:0a.0 init
> PCI: 00:0b.0 init
> PCI: 00:0c.0 init
> PCI: 00:0d.0 init
> PCI: 00:0e.0 init
> PCI: 00:0f.0 init
> PCI: 00:18.1 init
> PCI: 00:18.2 init
> PCI: 00:18.3 init
> NB: Function 3 Misc Control.. done.
> PCI: 00:01.2 init
> PCI: 00:01.3 init
> PCI: 07:00.0 init
> rom address for PCI: 07:00.0 = f4000000
> copying VGA ROM Image from 0xf4000000 to 0xc0000, 0x10000 bytes
> entering emulator
> halt_sys: file /home/goldorak/src/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
> PCI: 07:00.1 init
> Devices initialized
> Writing IRQ routing tables to 0xf0000...done.
> Wrote the mp table end at: 00000020 - 00000274
> Moving GDT to 0x500...ok
> Adjust low_table_end from 0x00000530 to 0x00001000
> Adjust rom_table_end from 0x000f0400 to 0x00100000
> Wrote linuxbios table at: 00000530 - 00000de8 checksum 8b7b
>
> Welcome to elfboot, the open sourced starter.
> January 2002, Eric Biederman.
> Version 1.3
>
> rom_stream: 0xfffc0000 - 0xfffdefff
> Found ELF candidate at offset 0
> header_offset is 0
> Try to load at offset 0x0
> New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08
> (cleaned up) New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08
> New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48
> (cleaned up) New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48
> Dropping non PT_LOAD segment
> Dropping non PT_LOAD segment
> Loading Segment: addr: 0x000000007ff80000 memsz: 0x000000000003cd20 filesz: 0x0000000000012d08
> Clearing Segment: addr: 0x000000007ff92d08 memsz: 0x000000000002a018
> Loading Segment: addr: 0x000000007ffbcd20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
> Jumping to boot code at 0x10e4fc
> FILO version 0.5 (goldorak at vega) Mon Jul 30 12:17:14 CEST 2007
> menu: hda3:/boot/filo/menu.lst
> hda: LBA 40GB: ST340016A
> Mounted ext2fs
> Mounted ext2fs
> Found Linux version 2.6.20-15-generic (root at yellow) #2 SMP Sun Apr 15 06:17:24 UTC 2007 bzImage.
> Loading kernel... ok
> Loading initrd... ok
> Jumping to entry point...
> [ 0.000000] Linux version 2.6.20-15-generic (root at yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
> [ 0.000000] Command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
> [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
> [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
> [ 0.000000] PCI: Unknown option `nobios'
> [ 0.000000] end_pfn_map = 524288
> [ 0.000000] DMI not present or invalid.
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] Number of nodes 1
> [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000
> [ 0.000000] Using node hash shift of 63
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 1 -> 4096
> [ 0.000000] DMA32 4096 -> 1048576
> [ 0.000000] Normal 1048576 -> 1048576
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 1 -> 160
> [ 0.000000] 0: 192 -> 240
> [ 0.000000] 0: 256 -> 524288
> [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
> [ 0.000000] If you got timer trouble try acpi_use_timer_override
> [ 0.000000] Intel MultiProcessor Specification v1.4
> [ 0.000000] MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000
> [ 0.000000] Processor #0 (Bootup-CPU)
> [ 0.000000] Processor #1
> [ 0.000000] I/O APIC #2 at 0xF4144000.
> [ 0.000000] Setting APIC routing to physical flat
> [ 0.000000] Processors: 2
> [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000c0000
> [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
> [ 0.000000] Built 1 zonelists. Total pages: 515988
> [ 0.000000] Kernel command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 14.894819] Console: colour VGA+ 80x25
> [ 15.113665] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 15.122054] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 15.129573] Checking aperture...
> [ 15.132845] CPU 0: aperture @ f0000000 size 64 MB
> [ 15.153081] Memory: 2053392k/2097152k available (2217k kernel code, 43564k reserved, 1162k data, 304k init)
> [ 15.239298] Calibrating delay using timer specific routine.. 4007.23 BogoMIPS (lpj=8014472)
> [ 15.247786] Security Framework v1.0.0 initialized
> [ 15.252531] SELinux: Disabled at boot.
> [ 15.256425] Mount-cache hash table entries: 256
> [ 15.261113] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 15.268272] CPU: L2 Cache: 512K (64 bytes/line)
> [ 15.272837] CPU 0/0 -> Node 0
> [ 15.275848] CPU: Physical Processor ID: 0
> [ 15.279895] CPU: Processor Core ID: 0
> [ 15.283616] SMP alternatives: switching to UP code
> [ 15.288656] Early unpacking initramfs... done
> [ 15.654009] Using local APIC timer interrupts.
> [ 15.708385] result 12500067
> [ 15.711211] Detected 12.500 MHz APIC timer.
> [ 15.718588] SMP alternatives: switching to SMP code
> [ 15.723595] Booting processor 1/2 APIC 0x1
> [ 15.737985] Initializing CPU#1
> [ 15.818192] Calibrating delay using timer specific routine.. 4000.37 BogoMIPS (lpj=8000749)
> [ 15.818199] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 15.818201] CPU: L2 Cache: 512K (64 bytes/line)
> [ 15.818203] CPU 1/1 -> Node 0
> [ 15.818205] CPU: Physical Processor ID: 0
> [ 15.818206] CPU: Processor Core ID: 1
> [ 15.818283] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
> [ 15.822187] CPU 1: Syncing TSC to CPU 0.
> [ 15.822283] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 522 cycles)
> [ 15.822293] Brought up 2 CPUs
> [ 15.877636] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
> [ 15.883931] time.c: Detected 2000.008 MHz processor.
> [ 16.528941] migration_cost=162
> [ 16.532453] Time: 7:33:56 Date: 08/18/107
> [ 16.536713] NET: Registered protocol family 16
> [ 16.541549] PCI: Using configuration type 1
> [ 16.546293] ACPI: Interpreter disabled.
> [ 16.550172] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 16.555868] pnp: PnP ACPI: disabled
> [ 16.559442] PCI: Probing PCI hardware
> [ 16.565011] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
> [ 16.571507] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
> [ 16.577380] PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10
> [ 16.583246] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22
> [ 16.589109] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23
> [ 16.594975] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20
> [ 16.600838] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23
> [ 16.606703] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21
> [ 16.612566] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23
> [ 16.618422] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22
> [ 16.624282] PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 17
> [ 16.630208] NET: Registered protocol family 8
> [ 16.634597] NET: Registered protocol family 20
> [ 16.639446] PCI: Bridge: 0000:00:06.0
> [ 16.643145] IO window: disabled.
> [ 16.646592] MEM window: disabled.
> [ 16.650114] PREFETCH window: disabled.
> [ 16.654069] PCI: Bridge: 0000:00:0a.0
> [ 16.657770] IO window: disabled.
> [ 16.661212] MEM window: disabled.
> [ 16.664731] PREFETCH window: disabled.
> [ 16.668685] PCI: Bridge: 0000:00:0b.0
> [ 16.672370] IO window: disabled.
> [ 16.675805] MEM window: disabled.
> [ 16.679334] PREFETCH window: disabled.
> [ 16.683287] PCI: Bridge: 0000:00:0c.0
> [ 16.686978] IO window: disabled.
> [ 16.690413] MEM window: disabled.
> [ 16.693934] PREFETCH window: disabled.
> [ 16.697890] PCI: Bridge: 0000:00:0d.0
> [ 16.701588] IO window: disabled.
> [ 16.705024] MEM window: disabled.
> [ 16.708543] PREFETCH window: disabled.
> [ 16.712497] PCI: Bridge: 0000:00:0e.0
> [ 16.716189] IO window: disabled.
> [ 16.719625] MEM window: disabled.
> [ 16.723154] PREFETCH window: disabled.
> [ 16.727106] PCI: Bridge: 0000:00:0f.0
> [ 16.730800] IO window: 1000-1fff
> [ 16.734234] MEM window: f4000000-f40fffff
> [ 16.738447] PREFETCH window: e0000000-efffffff
> [ 16.743180] NET: Registered protocol family 2
> [ 16.784375] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 16.791851] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> [ 16.801105] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 16.808276] TCP: Hash tables configured (established 262144 bind 65536)
> [ 16.814922] TCP reno registered
> [ 16.828347] checking if image is initramfs... it is
> [ 17.436378] Freeing initrd memory: 7303k freed
> [ 17.444561] audit: initializing netlink socket (disabled)
> [ 17.449996] audit(1190100836.192:1): initialized
> [ 17.454781] VFS: Disk quotas dquot_6.5.1
> [ 17.458748] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 17.465269] io scheduler noop registered
> [ 17.469845] io scheduler anticipatory registered
> [ 17.474538] io scheduler deadline registered
> [ 17.478891] io scheduler cfq registered (default)
> [ 17.483984] assign_interrupt_mode Found MSI capability
> [ 17.489224] assign_interrupt_mode Found MSI capability
> [ 17.494464] assign_interrupt_mode Found MSI capability
> [ 17.499698] assign_interrupt_mode Found MSI capability
> [ 17.504932] assign_interrupt_mode Found MSI capability
> [ 17.510166] assign_interrupt_mode Found MSI capability
> [ 17.537225] Real Time Clock Driver v1.12ac
> [ 17.541423] Linux agpgart interface v0.102 (c) Dave Jones
> [ 17.546844] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 17.554716] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 17.561149] mice: PS/2 mouse device common for all mice
> [ 17.566909] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [ 17.574629] input: Macintosh mouse button emulation as /class/input/input0
> [ 17.581552] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 17.587923] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 17.596182] PNP: No PS/2 controller found. Probing ports directly.
> [ 17.602653] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 17.607661] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 17.612828] TCP cubic registered
> [ 17.616103] NET: Registered protocol family 1
> [ 17.620531] Magic number: 7:141:572
> [ 17.624291] hash matches device ptyb4
> [ 17.628211] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> [ 17.634574] Freeing unused kernel memory: 304k freed
> Loading, please wait...
> [ 17.657708] input: AT Translated Set 2 keyboard as /class/input/input1
> Begin: Loading essential drivers... ...
> [ 17.787836] Capability LSM initialized
> Done.
> Begin: Running /scripts/init-premount ...
> [ 17.854745] thermal: Unknown symbol acpi_processor_set_thermal_limit
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Begin: Waiting for root file system... ...
> [ 18.265139] SCSI subsystem initialized
> [ 18.285688] ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 20
> [ 18.296126] ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 20
> [ 18.306495] scsi0 : sata_nv
> [ 18.309374] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
> [ 18.333571] usbcore: registered new interface driver usbfs
> [ 18.339184] usbcore: registered new interface driver hub
> [ 18.344603] usbcore: registered new device driver usb
> [ 18.620719] ata1: SATA link down (SStatus 0 SControl 300)
> [ 18.636473] ATA: abnormal status 0x7F on port 0x0000000000013007
> [ 18.642556] scsi1 : sata_nv
> [ 18.960055] ata2: SATA link down (SStatus 0 SControl 300)
> [ 18.975783] ATA: abnormal status 0x7F on port 0x0000000000013017
> [ 18.981957] ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 23
> [ 18.992347] ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 23
> [ 19.002718] scsi2 : sata_nv
> [ 19.319348] ata3: SATA link down (SStatus 0 SControl 300)
> [ 19.335123] ATA: abnormal status 0x7F on port 0x0000000000013027
> [ 19.341213] scsi3 : sata_nv
> [ 19.658684] ata4: SATA link down (SStatus 0 SControl 300)
> [ 19.674468] ATA: abnormal status 0x7F on port 0x0000000000013037
> [ 19.680638] ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21
> [ 19.691075] ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21
> [ 19.701443] scsi4 : sata_nv
> [ 20.017981] ata5: SATA link down (SStatus 0 SControl 300)
> [ 20.033744] ATA: abnormal status 0x7F on port 0x0000000000013047
> [ 20.039853] scsi5 : sata_nv
> [ 20.357317] ata6: SATA link down (SStatus 0 SControl 300)
> [ 20.373075] ATA: abnormal status 0x7F on port 0x0000000000013057
> [ 20.379209] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 20.384638] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> [ 20.392140] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf4145000
> [ 20.459229] usb usb1: configuration #1 chosen from 1 choice
> [ 20.464913] hub 1-0:1.0: USB hub found
> [ 20.468729] hub 1-0:1.0: 10 ports detected
> [ 20.577885] forcedeth: using HIGHDMA
> [ 20.880295] usb 1-8: new low speed USB device using ohci_hcd and address 2
> [ 21.090961] usb 1-8: configuration #1 chosen from 1 choice
> [ 21.106617] eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
> [ 21.113641] usbcore: registered new interface driver hiddev
> [ 21.119381] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
> [ 21.124927] input: PS/2+USB Mouse as /class/input/input2
> [ 21.124945] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-8
> [ 21.124958] usbcore: registered new interface driver usbhid
> [ 21.124961] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [ 21.150047] NFORCE-MCP55: chipset revision 161
> [ 21.154545] NFORCE-MCP55: not 100% native mode: will probe irqs later
> [ 21.161070] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
> [ 21.167324] ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio
> [ 21.463330] hda: ST340016A, ATA DISK drive
> [ 22.142016] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 22.146930] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 22.152413] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
> [ 22.159932] ehci_hcd 0000:00:02.1: debug port 1
> [ 22.164559] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf414a000
> [ 22.170298] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 22.177900] usb 1-8: USB disconnect, address 2
> [ 22.184259] usb usb2: configuration #1 chosen from 1 choice
> [ 22.191436] hub 2-0:1.0: USB hub found
> [ 22.195283] hub 2-0:1.0: 10 ports detected
> [ 22.318744] hda: max request size: 128KiB
> [ 22.323180] hda: Host Protected Area detected.
> [ 22.323182] current capacity is 78163247 sectors (40019 MB)
> [ 22.323183] native capacity is 78165360 sectors (40020 MB)
> [ 22.339592] hda: Host Protected Area disabled.
> [ 22.344119] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
> [ 22.352428] hda: cache flushes not supported
> [ 22.356784] hda: hda1 hda2 hda3
> Done.
--
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
More information about the coreboot
mailing list