[LinuxBIOS] r2788 - trunk/util/superiotool
svn at openbios.org
svn at openbios.org
Wed Sep 19 03:55:35 CEST 2007
Author: uwe
Date: 2007-09-19 03:55:35 +0200 (Wed, 19 Sep 2007)
New Revision: 2788
Modified:
trunk/util/superiotool/fintek.c
trunk/util/superiotool/ite.c
trunk/util/superiotool/nsc.c
trunk/util/superiotool/smsc.c
trunk/util/superiotool/superiotool.c
trunk/util/superiotool/superiotool.h
Log:
Further code simplifications and improvements.
Add command line option handling code. The following options
are defined at the moment:
-d|--dump Dump Super I/O registers.
-V|--verbose Verbose mode.
-v|--version Show the superiotool version.
-h|--help Show a short help text.
Per default (no options) we just probe for a Super I/O
and print its vendor, name, ID, version, and config port.
Example:
$ ./superiotool
Found SMSC FDC37N769 Super I/O (id=0x28, rev=0x01) at port=0x03f0
$ ./superiotool -d
Found SMSC FDC37N769 Super I/O (id=0x28, rev=0x01) at port=0x03f0
idx 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
val 20 90 80 f4 00 00 ff 00 00 00 40 00 0e 28 01 00 00 00 00 00 02 00 01 03 00 00 00 00 00 00 80 00 00 00 00 00 00 ba 00 00 03 00 00 23 03 03 00 00
def 28 9c 88 70 00 00 ff 00 00 00 00 00 02 28 NA 00 00 80 RR RR NA NA NA 03 RR RR RR RR RR RR 80 00 3c RR RR 00 00 00 00 00 00 00 RR 00 00 03 00 00
$ ./superiotool -s
./superiotool: invalid option -- s
$ ./superiotool -h
Usage: superiotool [-d] [-V] [-v] [-h]
$ ./superiotool -v
superiotool 0.1
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
Modified: trunk/util/superiotool/fintek.c
===================================================================
--- trunk/util/superiotool/fintek.c 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/fintek.c 2007-09-19 01:55:35 UTC (rev 2788)
@@ -89,7 +89,7 @@
regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8));
}
-void enter_conf_mode_fintek(uint16_t port)
+static void enter_conf_mode_fintek(uint16_t port)
{
/* Enable configuration sequence (Fintek uses this for example)
* Older ITE chips have the same enable sequence.
@@ -98,7 +98,7 @@
outb(0x87, port);
}
-void exit_conf_mode_fintek(uint16_t port)
+static void exit_conf_mode_fintek(uint16_t port)
{
/* Exit MB PnP mode (for Fintek, doesn't hurt ITE). */
outb(0xaa, port);
@@ -112,10 +112,7 @@
outb(0x20, port);
if (inb(port) != 0x20) {
- if (inb(port) == 0xff)
- printf("No Super I/O chip found at 0x%04x\n", port);
- else
- printf("Probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", port, inb(port), inb(port + 1));
+ no_superio_found(port);
return;
}
did = inb(port + 1);
Modified: trunk/util/superiotool/ite.c
===================================================================
--- trunk/util/superiotool/ite.c 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/ite.c 2007-09-19 01:55:35 UTC (rev 2788)
@@ -211,7 +211,7 @@
}
}
-void enter_conf_mode_ite(uint16_t port)
+static void enter_conf_mode_ite(uint16_t port)
{
/* Enable configuration sequence (ITE uses this for newer IT87[012]x)
* IT871[01] uses 0x87, 0x87 -> fintek detection should handle it
@@ -230,7 +230,7 @@
outb(0xAA, port);
}
-void exit_conf_mode_ite(uint16_t port)
+static void exit_conf_mode_ite(uint16_t port)
{
regwrite(port, 0x02, 0x02);
}
@@ -244,10 +244,7 @@
/* Read Chip ID Byte 1. */
id = regval(port, 0x20);
if (id != 0x87) {
- if (inb(port) == 0xff)
- printf("No Super I/O chip found at 0x%04x\n", port);
- else
- printf("Probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", port, inb(port), inb(port + 1));
+ no_superio_found(port);
return;
}
@@ -262,7 +259,8 @@
printf("Super I/O found at 0x%02x: id=0x%04x, chipver=0x%01x\n",
port, id, chipver);
- dump_ite(port, id);
+ if (dump)
+ dump_ite(port, id);
exit_conf_mode_ite(port);
}
Modified: trunk/util/superiotool/nsc.c
===================================================================
--- trunk/util/superiotool/nsc.c 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/nsc.c 2007-09-19 01:55:35 UTC (rev 2788)
@@ -62,10 +62,7 @@
outb(0x20, port);
if (inb(port) != 0x20) {
- if (inb(port) == 0xff)
- printf("No Super I/O chip found at 0x%04x\n", port);
- else
- printf("Probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", port, inb(port), inb(port + 1));
+ no_superio_found(port);
return;
}
id = inb(port + 1);
Modified: trunk/util/superiotool/smsc.c
===================================================================
--- trunk/util/superiotool/smsc.c 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/smsc.c 2007-09-19 01:55:35 UTC (rev 2788)
@@ -40,29 +40,16 @@
{EOT}
};
-void enter_conf_mode_smsc(uint16_t port)
+static void enter_conf_mode_smsc(uint16_t port)
{
outb(0x55, port);
}
-void exit_conf_mode_smsc(uint16_t port)
+static void exit_conf_mode_smsc(uint16_t port)
{
outb(0xaa, port);
}
-/* Note: The actual SMSC ID is 16 bits, but we must pass 32 bits here. */
-void dump_smsc(uint16_t port, uint16_t id)
-{
- switch (id) {
- case 0x28:
- dump_superio("SMSC", reg_table, port, id);
- break;
- default:
- printf("Unknown SMSC chip, id=0x%02x\n", id);
- break;
- }
-}
-
void probe_idregs_smsc(uint16_t port)
{
uint16_t id, rev;
@@ -72,20 +59,18 @@
/* Read device ID. */
id = regval(port, DEVICE_ID_REG);
if (id != 0x28) { /* TODO: Support for other SMSC chips. */
- if (inb(port) != 0xff)
- printf("No Super I/O chip found at 0x%04x\n", port);
- else
- printf("Probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", port, inb(port), inb(port + 1));
+ no_superio_found(port);
return;
}
/* Read chip revision. */
rev = regval(port, DEVICE_REV_REG);
- printf("Super I/O found at 0x%04x: id=0x%02x, rev=0x%02x\n",
- port, id, rev);
+ printf("Found SMSC %s Super I/O (id=0x%02x, rev=0x%02x) at port=0x%04x\n",
+ get_superio_name(reg_table, id), id, rev, port);
- dump_smsc(port, id );
+ if (dump)
+ dump_superio("SMSC", reg_table, port, id);
exit_conf_mode_smsc(port);
}
Modified: trunk/util/superiotool/superiotool.c
===================================================================
--- trunk/util/superiotool/superiotool.c 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/superiotool.c 2007-09-19 01:55:35 UTC (rev 2788)
@@ -22,6 +22,9 @@
#include "superiotool.h"
+/* Command line options. */
+int dump = 0, verbose = 0;
+
uint8_t regval(uint16_t port, uint8_t reg)
{
outb(reg, port);
@@ -34,6 +37,24 @@
outb(val, port + 1);
}
+const char *get_superio_name(const struct superio_registers reg_table[],
+ uint16_t id)
+{
+ int i;
+
+ for (i = 0; /* Nothing */; i++) {
+ if (reg_table[i].superio_id == EOT)
+ break;
+
+ if ((uint16_t)reg_table[i].superio_id != id)
+ continue;
+
+ return reg_table[i].name;
+ }
+
+ return "<unknown>";
+}
+
void dump_superio(const char *vendor, const struct superio_registers reg_table[],
uint16_t port, uint16_t id)
{
@@ -53,7 +74,6 @@
if (reg_table[i].ldn[j].ldn == EOT)
break;
- printf("%s %s\n", vendor, reg_table[i].name);
nodump = 0;
if (reg_table[i].ldn[j].ldn != NOLDN) {
@@ -98,10 +118,52 @@
}
}
+void no_superio_found(uint16_t port) {
+ if (!verbose)
+ return;
+
+ if (inb(port) == 0xff)
+ printf("No Super I/O chip found at 0x%04x\n", port);
+ else
+ printf("Probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", port, inb(port), inb(port + 1));
+}
+
int main(int argc, char *argv[])
{
- int i, j;
+ int i, j, opt, option_index;
+ const static struct option long_options[] = {
+ {"dump", no_argument, NULL, 'd'},
+ {"verbose", no_argument, NULL, 'V'},
+ {"version", no_argument, NULL, 'v'},
+ {"help", no_argument, NULL, 'h'},
+ {0, 0, 0, 0}
+ };
+
+ while ((opt = getopt_long(argc, argv, "dVvh",
+ long_options, &option_index)) != EOF) {
+ switch (opt) {
+ case 'd':
+ dump = 1;
+ break;
+ case 'V':
+ verbose = 1;
+ break;
+ case 'v':
+ printf("superiotool %s\n", SUPERIOTOOL_VERSION);
+ exit(0);
+ break;
+ case 'h':
+ printf("Usage: superiotool [-d] [-V] [-v] [-h]\n");
+ exit(0);
+ break;
+ default:
+ /* Unknown option. */
+ exit(1);
+ break;
+ }
+ }
+
if (iopl(3) < 0) {
perror("iopl");
exit(1);
Modified: trunk/util/superiotool/superiotool.h
===================================================================
--- trunk/util/superiotool/superiotool.h 2007-09-19 00:57:37 UTC (rev 2787)
+++ trunk/util/superiotool/superiotool.h 2007-09-19 01:55:35 UTC (rev 2788)
@@ -25,8 +25,11 @@
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
+#include <getopt.h>
#include <sys/io.h>
+#define SUPERIOTOOL_VERSION "0.1"
+
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#define EOT -1 /* End Of Table */
@@ -40,6 +43,9 @@
#define IDXSIZE (MAXNUMIDX + 1)
#define MAXNUMPORTS (2 + 1) /* Maximum number of Super I/O ports */
+/* Command line parameters. */
+extern int dump, verbose;
+
struct superio_registers {
int32_t superio_id; /* Signed, as we need EOT. */
const char name[MAXNAMELEN];
@@ -53,19 +59,17 @@
/* superiotool.c */
uint8_t regval(uint16_t port, uint8_t reg);
void regwrite(uint16_t port, uint8_t reg, uint8_t val);
+const char *get_superio_name(const struct superio_registers reg_table[],
+ uint16_t id);
void dump_superio(const char *name, const struct superio_registers reg_table[],
uint16_t port, uint16_t id);
-void probe_superio(uint16_t port);
+void no_superio_found(uint16_t port);
/* fintek.c */
-void enter_conf_mode_fintek(uint16_t port);
-void exit_conf_mode_fintek(uint16_t port);
void dump_fintek(uint16_t port, uint16_t did);
void probe_idregs_fintek(uint16_t port);
/* ite.c */
-void enter_conf_mode_ite(uint16_t port);
-void exit_conf_mode_ite(uint16_t port);
void dump_ite(uint16_t port, uint16_t id);
void probe_idregs_ite(uint16_t port);
@@ -74,9 +78,6 @@
void probe_idregs_simple(uint16_t port);
/* smsc.c */
-void enter_conf_mode_smsc(uint16_t port);
-void exit_conf_mode_smsc(uint16_t port);
-void dump_smsc(uint16_t port, uint16_t id);
void probe_idregs_smsc(uint16_t port);
/** Table of which config ports to probe on each Super I/O. */
More information about the coreboot
mailing list