[LinuxBIOS] different versions of the GA-M57SLI-S4 (PLCC vs SPI)

[Peter Stuge]

On Fri, Sep 07, 2007 at 09:17:14PM +0200, todthgie wrote:
> ----- Original Message ----- 
> From: "Peter Stuge" <peter at stuge.se>
> To: <linuxbios at linuxbios.org>
> Sent: Wednesday, September 05, 2007 19:55
> 
> > The only signal we can work with is CS#
> 
> how about #HOLD ?

It's not good enough on it's own.

Check out the MX flash chip data sheet.

The HOLD state in the chip depends on CS# as well, plus the HOLD# pin
is connected across both U5 and U9 which makes it annoying to work
with if we're going to use the U9 pads.


//Peter