[LinuxBIOS] r2896 build service

[LinuxBIOS information]

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2896 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
Some fixes for the BCOM WinNET100, mostly in Config.lb:

 - Add missing entry for the NIC:

     device pci 0f.0 on end           # Ethernet (onboard)

 - Drop the following lines:

     register "com1" = "{115200}"
     register "com2" = "{38400}"

   Those entries hardcode the BAUD rate (as far as I can tell, please
   correct me if I'm wrong). We don't want that -- instead the config option
   TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those
   lines will not break serial output (COM1, 115200, 8n1).

 - Enable IDE (PCI device 00:12.2) and add the following register lines
   to tell the CS5530 code to actually enable IDE channel 0:

      register "ide0_enable" = "1"
      register "ide1_enable" = "0"     # Not available/needed on this board

   Tested with a 2.5" hard drive and FILO, works fine.

 - Enable USB (PCI device 00:13.0), not sure why it was commented.

 - Enable COM2 as it's used by the smartcard reader.

 - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix
   abuild for this board.

 - Add some more comments.

Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan at coresystems.de>



Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=hdama&vendor=arima
Configuration of bcom:winnet100 has been fixed
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e326&vendor=ibm
Compilation of iei:juki-511p is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=juki-511p&vendor=iei
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8x&vendor=iwill
Compilation of newisys:khepri is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=khepri&vendor=newisys


If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system