[LinuxBIOS] question on lx raminit.c
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Sat Oct 20 03:23:29 CEST 2007
On 20.10.2007 02:44, ron minnich wrote:
> I offer the following diff and a question: can the use of && in these
> if expressions be wrong?
>
> Currently it is:
> if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS))
>
You want || because either condition should cause the error message. The
current statement will never be true because
(MIN_MOD_BANKS > MAX_MOD_BANKS) is never true.
> If spd_byte is 1, which is < MIN_MOD_BANKS, this if will fail, and it
> should not do that, since the min module banks is 2!
>
> I'm having trouble parsing this. BUT, lx raminit code works, so I am
> reluctant to mess with it.
>
> ron
>
> Index: src/northbridge/amd/lx/raminit.c
> ===================================================================
> --- src/northbridge/amd/lx/raminit.c (revision 2876)
> +++ src/northbridge/amd/lx/raminit.c (working copy)
> @@ -44,7 +44,7 @@
> /* Field: Module Banks per DIMM */
> /* EEPROM byte usage: (5) Number of DIMM Banks */
> spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS);
> - if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) {
> + if ((MIN_MOD_BANKS > spd_byte) || (spd_byte > MAX_MOD_BANKS)) {
> print_debug("Number of module banks not compatible\n");
> POST_CODE(ERROR_BANK_SET);
> __asm__ __volatile__("hlt\n");
> @@ -54,7 +54,7 @@
> /* Field: Banks per SDRAM device */
> /* EEPROM byte usage: (17) Number of Banks on SDRAM Device */
> spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
> - if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) {
> + if ((MIN_DEV_BANKS > spd_byte) || (spd_byte > MAX_DEV_BANKS)) {
> print_debug("Number of device banks not compatible\n");
> POST_CODE(ERROR_BANK_SET);
> __asm__ __volatile__("hlt\n");
>
Patch looks fine to me.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Carl-Daniel
More information about the coreboot
mailing list