[LinuxBIOS] Supertek ST-3ET

ron minnich rminnich at gmail.com
Tue Oct 16 20:34:59 CEST 2007

On 10/16/07, Markus <bios at ryven.de> wrote:
> Am Tue, 16 Oct 2007 10:47:04 -0700
> schrieb "ron minnich" <rminnich at gmail.com>:
> > On 10/16/07, Markus Boas <bios at ryven.de> wrote:
> >
> > > The change of the 256 to 512 in the config file
> > > at ./targets/eaglelion/5bcm/Config is not working.
> >
> > did you rerun buildtarget after the change?
> >
> > ron
> >
> Sure, I change it first an run then buildtarget.
> I think there are same hardcoded values out oft the Config.

I don't think it is a config iissue, I just tried and it builds 512K
image just fine. This likely means a hardcoded constant somewhere in
chipset setup such that only 256KB will work.

I've had this before and  one common symptom is that you can cat two
256K images together to get a working bios but building a 512KB wont'
work. Why? because the payload image in the 256k starts at fffc0000,
which works; the payload in the 512k starts at fff80000, which  won't
work due to chipset setup issues.


More information about the coreboot mailing list