[LinuxBIOS] MSI MS-6337 (i815 based)
joe at smittys.pointclark.net
joe at smittys.pointclark.net
Fri Oct 12 14:53:21 CEST 2007
Quoting Jouni Mettälä <jtmettala at gmail.com>:
> On 10/6/07, Uwe Hermann <uwe at hermann-uwe.de> wrote:
>>
>> >> lspnp: /proc/bus/pnp not available
>>
>> >Strange. Maybe you have to enable some "PnP" option in the BIOS for
>> >lspnp to work?
>>
>> There is two packages with same description pnpbios-tools and pnp-utils.
>> Now when both aare installed it gives output. lspnp-v is attached.
>
>
> I also managed to get some serial output after all. It's attached too :-)
> Somehow some af a letters are shown as i. There is some Pci bad id messages
> and it Cannot load ELF image.
>
Cool, Good job! Looks like your getting some weird characters before
each line. This could be caused by the wrong serial speed setting.
What do you have minicom set to?
Just a guess the lspnp: /proc/bus/pnp not available could be cause by
your LPC Interface Bridge. Eithor it is not enabled or not configured
for PNP maybe?
Thanks - Joe
More information about the coreboot
mailing list