[LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK

Corey Osgood corey.osgood at gmail.com
Fri Oct 12 10:49:02 CEST 2007


Morgan Tsai wrote:
> Dear Corey,
>
> I used manually partition, only /dev/sda1 for root '/' and /dev/sda2
> for swap, no lvm.
> Thanks for your idea.   :)

Was worth a shot. Good luck!

-Corey

>
>
> Morgan
>
> ----- Original Message ----- From: "Corey Osgood"
> <corey.osgood at gmail.com>
> To: "Morgan Tsai" <my_tsai at sis.com>
> Cc: "ron minnich" <rminnich at gmail.com>; "Uwe Hermann"
> <uwe at hermann-uwe.de>; "Russell Whitaker" <russ at ashlandhome.net>;
> "Dennis Chang /SiS" <ktchang at sis.com>; "Eric Lin" <ericlin at sis.com>;
> <linuxbios at linuxbios.org>
> Sent: Friday, October 12, 2007 4:22 PM
> Subject: Re: [LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK
>
>
>> Morgan Tsai wrote:
>>> Dear ron,
>>>
>>> I got a problem. When I connect an existing FC6 hdd on GA-2761GXDK, the
>>> message is:
>>>
>>> Jumping to boot code at 0x10dbf4
>>> FILO version 0.5 (morgan at cvs.sis.com) Mon Oct. 8 16:42:41 CST 2007
>>> Press <Enter> for default menu.lst (hde1:/boot/grub/menu.lst), or
>>> <Esc> for
>>> prom
>>> pt... timed out
>>> menu: hde1:/boot/grub/menu.lst
>>> hde: LBA 8622MB: ST38410A
>>> Mounted ext2fs
>>> Attempt to read out of device/partition
>>> File not found
>>> Press any key to continue.
>>> .................
>>>
>>> I had installed Fedora 6 with another board, and the original root
>>> partition
>>> is /dev/sda1
>>> Any idea?  Thanks!
>>
>> Doesn't fedora's installer usually like to make a seperate /boot
>> partition? If so, that's where you'll have to point FILO to. I don't
>> think FILO can handle lvm either (another default "feature" last time I
>> tried fedora), but I could be wrong.
>>
>> -Corey 
>
>





More information about the coreboot mailing list