[LinuxBIOS] Digital Logic msm800sel
Marc Jones
marc.jones at amd.com
Wed May 30 18:49:45 CEST 2007
Otávio,
Otávio Alcântara wrote:
> Hello,
>
> I used the buildrom tool, but the norwich board uses the
> companion serial and my board uses SUPERIO WINBOND w83267hf. So, I
> modified the code of /mainboar/amd/norwich/cache_as_ram_auto.c to work
> with this chip.
> It worked fine, but the boot process stop with :
>
> Before VSA:
> do_vsmbios
>
> I'm not including the vsa in the linuxbios.rom, is that the
> problem? And how can I concatenate the two files correctly?
>
> Regards,
>
> Otávio Alcântara
>
Yes you need VSA2 in the ROM. You can use buildrom in advance mode to
set a local linuxbios tree. Buildrom pulls the VSA binary from here:
http://www.amd.com/us-en/ConnectivitySolutions/ProductInformation/0,,50_2330_9863_11363,00.html
un-zip it
"cat lx_vsa.36k.bin norwich.rom > lb_norwich.rom"
You should end up with a 512KB ROM image.
Marc
> On 5/24/07, *Otávio Alcântara* <otavio.junior at gmail.com
> <mailto:otavio.junior at gmail.com>> wrote:
>
> Thanks Marc,
>
> I will try buildrom.
>
> Regards,
>
> Otavio
>
>
> On 5/23/07, *Marc Jones* < marc.jones at amd.com
> <mailto:marc.jones at amd.com>> wrote:
>
>
>
> Otávio Alcântara wrote:
> > I used a dissambly and there is no jump in the reset vector.
> I've tried
> > other board (amd rumba, using the same tools JTAG and memory
> > programmer) and it starts normaly the boot process, just don't
> finish it
> > because the processor is a Geode GX and my board is a LX one.
> I'll try
> > the norwich board that is similar to mine.
> > The problem I saw with msm800 is that linuxbios.rom is not on
> a valid
> > format, the file doesn't size like the ROM_SIZE option of
> > targets/../../Config.lb.
> >
> > Thanks,
> >
> > Otávio
> >
>
>
> Are you using buildrom?
>
> http://linuxbios.org/Buildrom <http://linuxbios.org/Buildrom>
>
> It is recommended to use it for LX systems. It should handle
> putting the
> VSA image with the LB binary to make the complete image.
> Marc
>
>
>
>
> > On 5/23/07, *ron minnich* < rminnich at gmail.com
> <mailto:rminnich at gmail.com>
> > <mailto: rminnich at gmail.com <mailto:rminnich at gmail.com>>> wrote:
> >
> > The first thing I ever do with problems of this type is simple:
> > hexdump romimage
> >
> > and see if I see a jump at end.
> >
> > ron
> >
> >
> >
> >
> > --
> > Otávio Alcântara
> > "I'll never cross to the Dark Side."
> >
>
> --
> Marc Jones
> Senior Software Engineer
> (970) 226-9684 Office
> mailto: Marc.Jones at amd.com <mailto:Marc.Jones at amd.com>
> http://www.amd.com/embeddedprocessors
>
>
>
>
>
> --
> Otávio Alcântara
> "I'll never cross to the Dark Side."
>
>
>
>
> --
> Otávio Alcântara
> "I'll never cross to the Dark Side."
--
Marc Jones
Senior Software Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list