[LinuxBIOS] Digital Logic msm800sel
Marc Jones
marc.jones at amd.com
Wed May 23 23:13:27 CEST 2007
Otávio Alcântara wrote:
> I used a dissambly and there is no jump in the reset vector. I've tried
> other board (amd rumba, using the same tools JTAG and memory
> programmer) and it starts normaly the boot process, just don't finish it
> because the processor is a Geode GX and my board is a LX one. I'll try
> the norwich board that is similar to mine.
> The problem I saw with msm800 is that linuxbios.rom is not on a valid
> format, the file doesn't size like the ROM_SIZE option of
> targets/../../Config.lb.
>
> Thanks,
>
> Otávio
>
Are you using buildrom?
http://linuxbios.org/Buildrom
It is recommended to use it for LX systems. It should handle putting the
VSA image with the LB binary to make the complete image.
Marc
> On 5/23/07, *ron minnich* <rminnich at gmail.com
> <mailto:rminnich at gmail.com>> wrote:
>
> The first thing I ever do with problems of this type is simple:
> hexdump romimage
>
> and see if I see a jump at end.
>
> ron
>
>
>
>
> --
> Otávio Alcântara
> "I'll never cross to the Dark Side."
>
--
Marc Jones
Senior Software Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list