[LinuxBIOS] Willem EEPROM Programmer

[roger]

On Mon, 2007-05-14 at 01:09 -0400, Corey Osgood wrote:

> Too late, bought it about a month ago. Flashrom doesn't work on this
> particular board, and besides, a dedicated programmer *should* be faster
> than booting up, flashing, and then rebooting (unless you stripped a
> distro down to nothing just for that purpose). It's almost guaranteed
> that it'd be faster than this system: boot up, copy rom from usb to
> floppy, reboot from disk, flash, reboot again. Also, I bought it from a
> canadian company (mcumall), and through ebay, no dealings with any dutch
> companies ;) Afaik, the Willem schematics are free for the taking, so
> anyone can build and/or sell one. I think I'm about to find a windows
> 98se cd and install that on whatever I can find, and see if this thing
> actually does work.

Have you tried Uniflash?

It run in DOS and is written in Pascal.  I used a FreeDOS livecd...
matter of fact, even installed FreeDOS to a 2nd partition with Uniflash.

Uniflash supports a vast number of flash parts.

--
Roger
http://www.eskimo.com/~roger/index.html
Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61

Sun May 13 23:31:49 PDT 2007