[LinuxBIOS] where do board-specific superio settings belong?

yhlu yinghailu at gmail.com
Fri May 11 20:46:19 CEST 2007


On 5/11/07, Ward Vandewege <ward at gnu.org> wrote:
> On Tue, May 01, 2007 at 12:59:40PM -0700, yhlu wrote:
> I tried adding them to mainboard.c, but that is too early in the process; if
> I add a mainboard_init there (hooked into the init action of
> mainboard_operations), this code is executed quite a bit before the adt7463
> chip is enabled, which is not what I want.
>
> Is there a way to get mainboard specific code to be executed much later in
> the boot process, after all devices have been enabled?

two way
1. some thing like debug_dev. and you set the in your MB config. the
device will under mainboard/tyan/s2881/mb

2. in mainboard.c you allocate one device dynamcally, and make it the
under second link of root device. that will be the real last one..

YH




More information about the coreboot mailing list