[LinuxBIOS] VIA Auto Power ON
Peter Stuge
stuge-linuxbios at cdy.org
Wed May 2 19:01:24 CEST 2007
On Wed, May 02, 2007 at 08:01:14AM +0200, Marcel Graber wrote:
> Is there a solution to get the via epia-m2 board to auto Power
There's a simple way to do it in hardware at least, put a capacitor
over the PWRSW pins.
I've gotten the most reliable results with a 1uF electrolytic
capacitor, higher capacitances have been unreliable.
(Note the polarity if you're using an electrolytic capacitor.)
//Peter
More information about the coreboot
mailing list