[LinuxBIOS] [PATCH] flashrom: board specific enables based on matching pci-ids.

Luc Verhaegen libv at skynet.be
Sun Mar 25 18:05:51 CEST 2007

On Sun, Mar 25, 2007 at 01:40:23AM -0400, Corey Osgood wrote:
> Luc, could you check out the PCChips M789CG for me and see if this can
> support it? The stock bios is an AMIBIOS (if it matters), with a VT8235M
> southbridge and ITE IT8705f Super I/O (docs here:
> http://www.iteusa.com/product_info/file/pc/IT8705F_V.0.4.1.pdf). I've
> tried both the epia-m and asus fixups that are currently in your patch,
> but neither of them worked, and I know very little about the workings of
> flashrom. Here's the line with my vendor ids:
> { 0x1106, 0x3177, 0x1106, 0x0000,  0x1106, 0x3123, 0x1106, 0x0000,
> "PCChips M789CG(v3.0)", enable_flash_xxx },
> Also, should we be moving these board-specific flash fixups off into
> another file? I get the feeling we're going to have a lot of them in the
> future.
> Thanks,
> Corey
I'll hand you a bit of python in a few hours that gathers the following 
* Int16 vector for AMI
* Dump of 0xE0000-0xFFFFF. The int16 vector should live here, and the 
AWDFLASH structure exists here too.

So a tiny bit of python will provide for AMI and AWD.

Luc Verhaegen.

More information about the coreboot mailing list