[LinuxBIOS] northbridge docs

joe at smittys.pointclark.net joe at smittys.pointclark.net
Mon Mar 19 09:27:06 CET 2007

Quoting joe at smittys.pointclark.net:

> Hello,
> I am working on the code for my northbridge (Intel 82830).
> Particularly the raminit.c file. By looking at the sources from the
> other northbridges and my datasheets, I am getting a little lost. My
> datasheet (Intel) lists all the registers and their defaults but
> doesn't really explain the memory initialization process. Could
> someone direct me to some good docs that explain how memory
> initialization happens at boot time? The more detail the better. I am
> using SDRAM so SDRAM specific would be great. I was looking at the
> code from the via vt8601, but it seems like alot of the registers are
> hardcoded into the code (no disrespect Ron, I saw you converted it to
> C). I would like to write one that is a lot more dynamic (more
> definitions to uniqe code) so it can also be used to as sort of a
> template for other SDRAM based northbridges.
> Thanks - Joe
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
I just have to say, after hours of reading datasheets and examining  
code that who ever wrote the code for the e7520 and e7525 nothbridges  
is brilliant!! The way the code is setup is going to work perfect for  
me and maybe other people looking for Intel northbridge code starting  
points. I think if any of you working on the 440bx should just scrap  
the existing and start over with e7520 and e7525 as a template, maybe  
not, but you might be able to get it working this way. Anyways, I just  
wanted to Acknowledge some great code writing.

Thanks  - Joe

More information about the coreboot mailing list