[LinuxBIOS] r2571 - in trunk/LinuxBIOSv2/src/southbridge/via: . vt82c686
svn at openbios.org
svn at openbios.org
Sat Mar 17 15:00:23 CET 2007
Author: uwe
Date: 2007-03-17 15:00:23 +0100 (Sat, 17 Mar 2007)
New Revision: 2571
Added:
trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/
trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/Config.lb
trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/chip.h
trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686.h
trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686_early_serial.c
Log:
Add initial pre-RAM serial output support for the VIA VT82C686(A/B)
southbridge (with integrated Super-I/O).
Signed-off-by: Corey Osgood <corey_osgood at verizon.net>
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Corey Osgood <corey_osgood at verizon.net>
Added: trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/Config.lb
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/Config.lb (rev 0)
+++ trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/Config.lb 2007-03-17 14:00:23 UTC (rev 2571)
@@ -0,0 +1,22 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Corey Osgood <corey_osgood at verizon.net>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config chip.h
+
Added: trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/chip.h
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/chip.h (rev 0)
+++ trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/chip.h 2007-03-17 14:00:23 UTC (rev 2571)
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Corey Osgood <corey_osgood at verizon.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SUPERIO_VIA_VT82C686
+#define _SUPERIO_VIA_VT82C686
+
+#include <device/device.h>
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+extern struct chip_operations superio_via_vt82c686_ops;
+
+struct superio_via_vt82c686_config {
+ struct uart8250 com1, com2;
+ struct pc_keyboard keyboard;
+};
+
+#endif /* _SUPERIO_VIA_VT82C686 */
Added: trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686.h
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686.h (rev 0)
+++ trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686.h 2007-03-17 14:00:23 UTC (rev 2571)
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Corey Osgood <corey_osgood at verizon.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Datasheets:
+ * Name: VT82C686A "Super South" South Bridge
+ * Link: http://www.datasheets.org.uk/datasheet.php?article=3510260
+ * Name: VT82C686B "Super South" South Bridge
+ * Link: http://www.datasheet4u.com/html/V/T/8/VT82C686B_VIA.pdf.html
+ */
+
+/* Super I/0 Configuration Registers. */
+/* Any registers not listed here are reserved. */
+#define VT82C686_SIO_DEV_ID 0xe0 /* Super-I/O Device ID */
+#define VT82C686_SIO_REV 0xe1 /* Super-I/O Device Revision */
+#define VT82C686_FS 0xe2 /* Function Select */
+#define VT82C686_FDC 0xe3 /* Floppy */
+#define VT82C686_PP 0xe6 /* Parallel Port */
+#define VT82C686_SP1 0xe7 /* Serial Port 1 */
+#define VT82C686_SP2 0xe8 /* Serial Port 2 */
+#define VT82C686_SP_CFG 0xee /* Serial Port Configuration */
+#define VT82C686_POWER 0xef /* Power Down Control */
+#define VT82C686_PP_CTRL 0xf0 /* Parallel Port Control */
+#define VT82C686_SP_CTRL 0xf1 /* Serial Port Control */
+#define VT82C686_FDC_CFG 0xf6 /* Floppy Controller Configuration */
+#define VT82C686_FDC_DC 0xf8 /* Floppy Drive Control */
+#define VT82C686_GPIO 0xfc /* General Purpose I/O */
+
+/* For reference, used PCI IDs and their names in pci_ids.h: */
+/*
+PCI_VENDOR_ID_VIA 0x1106
+PCI_DEVICE_ID_VIA_82C686 0x0686 // Function 0, PCI Config
+PCI_DEVICE_ID_VIA_82C586_1 0x0571 // Function 1, IDE Controller
+PCI_DEVICE_ID_VIA_82C586_2 0x3038 // Functions 2 & 3, USB Ports 0-1 & 2-3
+PCI_DEVICE_ID_VIA_82C586_3 0x3040 // Possible 2nd USB Controller?
+PCI_DEVICE_ID_VIA_82C686_4 0x3057 // Function 4, Power Management
+PCI_DEVICE_ID_VIA_82C686_5 0x3058 // Function 5, AC'97 Codec
+PCI_DEVICE_ID_VIA_82C686_6 0x3068 // Function 6, MC'97 Codec
+*/
+
Added: trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686_early_serial.c
===================================================================
--- trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686_early_serial.c (rev 0)
+++ trunk/LinuxBIOSv2/src/southbridge/via/vt82c686/vt82c686_early_serial.c 2007-03-17 14:00:23 UTC (rev 2571)
@@ -0,0 +1,92 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006-2007 Uwe Hermann <uwe at hermann-uwe.de>
+ * Copyright (C) 2007 Corey Osgood <corey_osgood at verizon.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This has been ported to the VIA VT82C686(A/B) from the SMSC FDC37M60x
+ * by Corey Osgood. See vt82c686.h for more information. */
+
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+#include "vt82c686.h"
+
+#define SIO_INDEX 0x3f0
+#define SIO_DATA 0x3f1
+
+/**
+ * Configure the chip by writing the byte 'value' into the register
+ * specified by 'index'.
+ *
+ * @param index The index of the register to modify.
+ * @param value The value to write into the register.
+ */
+static void vt82c686_sio_write(uint8_t index, uint8_t value)
+{
+ outb(index, SIO_INDEX);
+ outb(value, SIO_DATA);
+}
+
+/**
+ * Enable the serial port(s) of the VT82C686(A/B) Super I/O chip.
+ *
+ * @param dev TODO
+ * @param iobase TODO
+ */
+static void vt82c686_enable_serial(device_t dev, unsigned iobase)
+{
+ uint8_t reg;
+ device_t sbdev;
+
+ /* TODO: Use info from 'dev' and 'iobase'. */
+ /* TODO: Only enable one serial port (depending on config) or both? */
+
+ /* (1) Enter configuration mode (set Function 0 Rx85[1] = 1). */
+
+ /* Find the southbridge. Die upon error. */
+ sbdev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C686), 0);
+ // sbdev = PCI_DEV(0, 7, 0);
+ if (sbdev == PCI_DEV_INVALID) {
+ /* Serial output is not yet working at this point, but
+ * die() emits the POST code 0xff and halts the CPU, too. */
+ die("Southbridge not found.\r\n");
+ }
+
+ /* Enable Super-I/O (bit 0) and Super-I/O Configuration (bit 1). */
+ reg = pci_read_config8(sbdev, 0x85);
+ pci_write_config8(sbdev, 0x85, reg | 0x3); /* Set bits 0 and 1. */
+
+ /* (2) Configure the chip. */
+
+ /* Enable serial port 1 (set bit 2) and 2 (set bit 3). */
+ vt82c686_sio_write(VT82C686_FS, 0xf);
+
+ // vt82c686_sio_write(VT82C686_POWER, 0x00); /* No powerdown */
+ // vt82c686_sio_write(VT82C686_SP_CTRL, 0x00); /* Normal operation */
+ vt82c686_sio_write(VT82C686_SP1, 0xfe); /* SP1: 0x3f8 */
+ vt82c686_sio_write(VT82C686_SP2, 0xbe); /* SP2: 0x2f8 */
+
+ /* Enable high speed on serial port 1 (set bit 6) and 2 (set bit 7). */
+ vt82c686_sio_write(VT82C686_SP_CFG, 0xc0);
+
+ /* (3) Exit configuration mode (set Function 0 Rx85[1] = 0). */
+ reg = pci_read_config8(sbdev, 0x85);
+ pci_write_config8(sbdev, 0x85, reg & 0xfd); /* Clear bit 1. */
+}
+
More information about the coreboot
mailing list