[LinuxBIOS] trying to boot gigabyte m57sli-s4
Ward Vandewege
ward at gnu.org
Wed Mar 7 01:13:02 CET 2007
Hi YH and list,
I've been trying to get the the gigabyte m57sli-s4 to boot, using the code
that YH sent to the list on January 19th (the code in the v2 tree does not
compile yet), but I'm having some IRQ problems it seems.
I see things like this in the boot log:
[ 81.290497] PCI: Probing PCI hardware
[ 81.295506] PCI: Unable to handle 64-bit address space for bridge
0000:00:0b.0
[ 81.303828] PCI: Unable to handle 64-bit address space for bridge
0000:00:0c.0
[ 81.312150] PCI: Unable to handle 64-bit address space for bridge
0000:00:0d.0
[ 81.320479] PCI: Unable to handle 64-bit address space for bridge
0000:00:0e.0
[ 81.328817] PCI: Unable to handle 64-bit address space for bridge
0000:00:0f.0
[ 81.337596] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
[ 81.345008] PCI: IRQ 0 for device 0000:00:06.1 doesn't match PIRQ mask -
try pci=usepirqmask
And a bit further:
[ 81.526599] pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check
vendor BIOS
[ 81.535189] assign_interrupt_mode Found MSI capability
[ 81.541136] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check
vendor BIOS
[ 81.549747] assign_interrupt_mode Found MSI capability
[ 81.555689] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check
vendor BIOS
[ 81.564285] assign_interrupt_mode Found MSI capability
[ 81.570227] pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check
vendor BIOS
[ 81.578857] assign_interrupt_mode Found MSI capability
[ 81.584806] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check
vendor BIOS
[ 81.593409] assign_interrupt_mode Found MSI capability
[ 81.599350] pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check
vendor BIOS
[ 81.607949] assign_interrupt_mode Found MSI capability
The interesting thing is that those pci ids don't exist on the board.
The boot fails with a kernel panic:
[ 82.619607] SCSI subsystem initialized
[ 82.625477] PCI: No IRQ known for interrupt pin A of device 0000:00:05.0.
Please try using pci=biosirq.
[ 82.636355] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq
0
[ 82.644455] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq
0
[ 82.652544] Unable to handle kernel NULL pointer dereference at virtual
address 00000000
I've tried 2 different (32 bit) kernels: the 2.6.15 one that comes with
Gnewsense, and a stock 2.6.20.1 from kernel.org.
I've attached both boot logs - the 2.6.15 one is called
minicom-gb-20070306-04.cap, and the 2.6.20.1 is called
minicom-gb-20070306-07.cap.
I have not tried a 64 bit kernel yet.
Any suggestions as to what is going on here?
Thanks,
Ward.
--
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
-------------- next part --------------
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 14:59:03 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a12120a0c0202
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
ht reset -
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 14:59:03 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0c020c
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00200000 KB
Ram3
dimm_mask = 00000011
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00113222
Addr Timing= 00202520
Initializing memory: done
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
Total DQS Training : tsc [00]=00000007e459d2c6
Total DQS Training : tsc [01]=00000007e5ad9387
Total DQS Training : tsc [02]=0000000853c4a31f
Total DQS Training : tsc [03]=0000000854e96e97
Ram4
v_esp=000ceec4
Copying data from cache to ram -- switching to use ram as stack... Done
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000cc87
linxbios_ram.bin length = 00021250
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 14:59:03 EST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 disabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
Done reading resources.
Allocating VGA resource PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 000b
PCI: 00:0a.0 cmd <- 147
PCI: 02:00.0 cmd <- 143
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 0003
PCI: 00:0f.0 cmd <- 140
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b
Final : tsc [0a]=00000008cb150c69
Initializing CPU #0
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
Final : tsc [0b]=00000008db0c2491
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 02:00.0 init
rom address for PCI: 02:00.0 = f6000000
copying VGA ROM Image from f6000000 to c0000, ee00 bytes
entering emulator
halt_sys: file /home/ward/lb/yh/freebios2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Adjust low_table_end from 0x00000500 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000500 - 00000db0 checksum f549
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candiate at offset 0
New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
(cleaned up) New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
(cleaned up) New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016168
Clearing Segment: addr: 0x000000007ff9a168 memsz: 0x0000000000027e98
Loading Segment: addr: 0x000000000013ff20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Loading Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20 filesz: 0x0000000000000000
Clearing Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20
Jumping to boot code at 0x10f768
FILO version 0.5 (ward at neuromancer) Tue Mar 6 14:58:22 EST 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x7ffe2120
collect_sys_info: boot arg = 0x7ffe2120
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000500
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000500
malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks)
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000007ff00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000080000000
collect_sys_info: RAM 2048 MB
relocate: Current location: 0x100000-0x13ff67
relocate: Relocating to 0x7ffc0090-0x7ffffff7... ok
setup_timers: CPU 2000 MHz
pci_init: Scanning PCI: found 25 devices
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
pci_init: 00:00.0 10de:0369 0500 00
pci_init: 00:01.0 10de:0360 0601 00
pci_init: 00:01.1 10de:0368 0c05 00
pci_init: 00:01.2 10de:036a 0500 00
pci_init: 00:01.3 10de:036b 0b40 00
pci_init: 00:02.0 10de:036c 0c03 10
pci_init: 00:02.1 10de:036d 0c03 20
pci_init: 00:04.0 10de:036e 0101 8a
pci_init: 00:05.0 10de:037f 0101 85
pci_init: 00:05.1 10de:037f 0101 85
pci_init: 00:05.2 10de:037f 0101 85
pci_init: 00:06.0 10de:0370 0604 00
pci_init: 00:06.1 10de:0371 0403 00
pci_init: 00:08.0 10de:0373 0680 00
pci_init: 00:0a.0 10de:0376 0604 00
pci_init: 00:0b.0 10de:0374 0604 00
pci_init: 00:0c.0 10de:0374 0604 00
pci_init: 00:0d.0 10de:0378 0604 00
pci_init: 00:0e.0 10de:0375 0604 00
pci_init: 00:0f.0 10de:0377 0604 00
pci_init: 00:18.0 1022:1100 0600 00
pci_init: 00:18.1 1022:1101 0600 00
pci_init: 00:18.2 1022:1102 0600 00
pci_init: 00:18.3 1022:1103 0600 00
pci_init: 02:00.0 10de:0392 0300 00
menu: hde1:/boot/grub/menu.lst
malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks)
file_open: dev=hde1, path=/boot/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488397168
init_drive: Init device params... ok
hde: LBA48 250GB: WDC WD2500JS-60NCB1
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 63 length 476230797
Mounted ext2fs
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press `ESC' to enter the menu... 2 Press `ESC' to enter the menu... 1 Press `ESC' to enter the menu... 0 Booting 'lbgNewSense, kernel 2.6.15-27-386'
root (hd4,0)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/hde1 ro noapic console=tty0 conso
le=ttyS0,115200
initrd /boot/initrd.img-2.6.15-27-386
boot
Booting 'hde1:/boot/vmlinuz-2.6.15-27-386 root=/dev/hde1 ro noapic console=tty0
console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-27-386'
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
malloc_diag: alloc: 600 bytes (6 blocks), free: 15776 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-27-386
devopen: already open
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 600 bytes (6 blocks), free: 15776 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-27-386
devopen: already open
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
Found Linux version 2.6.15-27-386 (root at sandbox) #1 PREEMPT Thu Dec 14 01:13:23 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-27-386"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 624 bytes (6 blocks), free: 15752 bytes (1 blocks)
parse_command_line: initrd=/boot/initrd.img-2.6.15-27-386
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x15783d
Loading kernel... ok
file_open: dev=<NULL>, path=/boot/initrd.img-2.6.15-27-386
load_initrd: start=0x1fa0b000 end=0x1ffff361
Loading initrd... ok
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
start_linux: eip=0x100000
Jumping to entry point...
[17179569.184000] Linux version 2.6.15-27-386 (root at sandbox) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Dec 14 01:13:23 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
[17179569.184000] 1152MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 00000010
[17179569.184000] DMI not present.
[17179569.184000] ACPI: Unable to locate RSDP
[17179569.184000] Intel MultiProcessor Specification v1.4
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: GIGABYTE Product ID: M57SLI APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:11 APIC version 16
[17179569.184000] Processor #1 15:11 APIC version 16
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] I/O APIC #2 Version 17 at 0xF6144000.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[ 0.000000] Detected 2000.221 MHz processor.
[ 80.260899] Using tsc for high-res timesource
[ 80.262208] Console: colour VGA+ 80x25
[ 80.415699] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 80.423897] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 80.494924] Memory: 2069416k/2097152k available (1976k kernel code, 26620k reserved, 606k data, 288k init, 1179648k highmem)
[ 80.507281] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 80.592702] Calibrating delay using timer specific routine.. 4007.36 BogoMIPS (lpj=8014733)
[ 80.601990] Security Framework v1.0.0 initialized
[ 80.607202] SELinux: Disabled at boot.
[ 80.611460] Mount-cache hash table entries: 512
[ 80.616553] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 80.624727] CPU: L2 Cache: 512K (64 bytes/line)
[ 80.629941] mtrr: v2.0 (20020519)
[ 80.633772] CPU: AMD Processor model unknown stepping 02
[ 80.639990] Enabling fast FPU save and restore... done.
[ 80.646054] Enabling unmasked SIMD FPU exception support... done.
[ 80.653109] Checking 'hlt' instruction... OK.
[ 80.673235] checking if image is initramfs... it is
[ 81.127646] Freeing initrd memory: 6096k freed
[ 81.243651] NET: Registered protocol family 16
[ 81.248779] EISA bus registered
[ 81.252758] PCI: Using configuration type 1
[ 81.257832] ACPI: Subsystem revision 20051216
[ 81.262851] ACPI: Interpreter disabled.
[ 81.267328] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 81.273839] pnp: PnP ACPI: disabled
[ 81.277859] PnPBIOS: Scanning system for PnP BIOS support...
[ 81.284418] PnPBIOS: PnP BIOS support was not detected.
[ 81.290497] PCI: Probing PCI hardware
[ 81.295506] PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0
[ 81.303828] PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0
[ 81.312150] PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0
[ 81.320479] PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0
[ 81.328817] PCI: Unable to handle 64-bit address space for bridge 0000:00:0f.0
[ 81.337596] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
[ 81.345008] PCI: IRQ 0 for device 0000:00:06.1 doesn't match PIRQ mask - try pci=usepirqmask
[ 81.354850] PCI: Bridge: 0000:00:06.0
[ 81.359061] IO window: disabled.
[ 81.362984] MEM window: disabled.
[ 81.367001] PREFETCH window: disabled.
[ 81.371517] PCI: Bridge: 0000:00:0a.0
[ 81.375747] IO window: 1000-1fff
[ 81.379683] MEM window: f4000000-f60fffff
[ 81.384518] PREFETCH window: e0000000-efffffff
[ 81.389838] PCI: Bridge: 0000:00:0b.0
[ 81.394065] IO window: disabled.
[ 81.398003] MEM window: disabled.
[ 81.402024] PREFETCH window: disabled.
[ 81.406549] PCI: Bridge: 0000:00:0c.0
[ 81.410786] IO window: disabled.
[ 81.414704] MEM window: disabled.
[ 81.418727] PREFETCH window: disabled.
[ 81.423242] PCI: Bridge: 0000:00:0d.0
[ 81.427462] IO window: disabled.
[ 81.431390] MEM window: disabled.
[ 81.435420] PREFETCH window: disabled.
[ 81.439936] PCI: Bridge: 0000:00:0e.0
[ 81.444165] IO window: disabled.
[ 81.448084] MEM window: disabled.
[ 81.452105] PREFETCH window: disabled.
[ 81.456630] PCI: Bridge: 0000:00:0f.0
[ 81.460850] IO window: disabled.
[ 81.464778] MEM window: disabled.
[ 81.468809] PREFETCH window: disabled.
[ 81.473622] audit: initializing netlink socket (disabled)
[ 81.479817] audit(1173213964.364:1): initialized
[ 81.485155] highmem bounce pool size: 64 pages
[ 81.490301] VFS: Disk quotas dquot_6.5.1
[ 81.494835] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 81.502356] Initializing Cryptographic API
[ 81.507080] io scheduler noop registered
[ 81.511635] io scheduler anticipatory registered
[ 81.516990] io scheduler deadline registered
[ 81.521942] io scheduler cfq registered
[ 81.526599] pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
[ 81.535189] assign_interrupt_mode Found MSI capability
[ 81.541136] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[ 81.549747] assign_interrupt_mode Found MSI capability
[ 81.555689] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[ 81.564285] assign_interrupt_mode Found MSI capability
[ 81.570227] pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
[ 81.578857] assign_interrupt_mode Found MSI capability
[ 81.584806] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
[ 81.593409] assign_interrupt_mode Found MSI capability
[ 81.599350] pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
[ 81.607949] assign_interrupt_mode Found MSI capability
[ 81.613918] isapnp: Scanning for PnP cards...
[ 81.972624] isapnp: No Plug & Play device found
[ 81.985609] PNP: No PS/2 controller found. Probing ports directly.
[ 81.992875] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 81.998696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 82.004667] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 82.013738] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 82.021927] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 82.030648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 82.037929] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 82.047283] mice: PS/2 mouse device common for all mice
[ 82.053362] EISA: Probing bus 0 at eisa.0
[ 82.058013] Cannot allocate resource for EISA slot 1
[ 82.063761] Cannot allocate resource for EISA slot 2
[ 82.069476] Cannot allocate resource for EISA slot 3
[ 82.075211] EISA: Detected 0 cards.
[ 82.079269] NET: Registered protocol family 2
[ 82.098329] input: AT Translated Set 2 keyboard as /class/input/input0
[ 82.121832] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 82.131327] TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
[ 82.141069] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 82.148803] TCP: Hash tables configured (established 524288 bind 65536)
[ 82.156388] TCP reno registered
[ 82.160087] TCP bic registered
[ 82.163619] NET: Registered protocol family 1
[ 82.168628] NET: Registered protocol family 8
[ 82.173642] NET: Registered protocol family 20
[ 82.178766] Using IPI Shortcut mode
[ 82.182815] Freeing unused kernel memory: 288k freed
Begin: Loading essential drivers... ...
[ 82.228674] Capability LSM initialized
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
[ 82.619607] SCSI subsystem initialized
[ 82.625477] PCI: No IRQ known for interrupt pin A of device 0000:00:05.0. Please try using pci=biosirq.
[ 82.636355] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq 0
[ 82.644455] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq 0
[ 82.652544] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 82.661881] printing eip:
[ 82.665023] c0245454
[ 82.667551] *pde = 00000000
[ 82.670785] Oops: 0000 [#1]
[ 82.674005] PREEMPT
[ 82.676597] Modules linked in: sata_nv libata scsi_mod processor fbcon tileblit font bitblit softcursor capability commoncap
[ 82.689980] CPU: 0
[ 82.689981] EIP: 0060:[<c0245454>] Not tainted VLI
[ 82.689982] EFLAGS: 00010206 (2.6.15-27-386)
[ 82.703902] EIP is at make_class_name+0x34/0xc0
[ 82.709099] eax: 00000000 ebx: ffffffff ecx: ffffffff edx: f887cf10
[ 82.716859] esi: 00000009 edi: 00000000 ebp: 00000000 esp: df8ebe08
[ 82.724618] ds: 007b es: 007b ss: 0068
[ 82.729330] Process modprobe (pid: 1668, threadinfo=df8ea000 task=c21f7030)
[ 82.737083] Stack: 00000000 ffffffff ffffffff 00000056 df8ebe52 c21ed000 00000246 f888ffc4
[ 82.747094] c21ed1f4 f888ffc4 f888ff60 c0245884 c21ed1f4 00000000 f888ffcc c21ed1f4
[ 82.757051] c21ed000 00000286 c21dd400 c024590b c21ed1f4 c21ed0d4 f887160f c21ed1f4
[ 82.767016] Call Trace:
[ 82.770079] [<c0245884>] class_device_del+0x84/0x100
[ 82.775967] [<c024590b>] class_device_unregister+0xb/0x20
[ 82.782341] [<f887160f>] scsi_remove_host+0xaf/0x130 [scsi_mod]
[ 82.789321] [<f8898b15>] ata_host_remove+0x15/0x30 [libata]
[ 82.795877] [<f8898fbb>] ata_device_add+0x20b/0x2a0 [libata]
[ 82.802538] [<f881d325>] nv_init_one+0x185/0x230 [sata_nv]
[ 82.809000] [<c01e6ffc>] __pci_device_probe+0x3c/0x60
[ 82.814968] [<c01e703f>] pci_device_probe+0x1f/0x40
[ 82.820755] [<c024457b>] driver_probe_device+0x3b/0xc0
[ 82.826817] [<c0244670>] __driver_attach+0x0/0x40
[ 82.832406] [<c02446ab>] __driver_attach+0x3b/0x40
[ 82.838071] [<c0243c58>] bus_for_each_dev+0x48/0x80
[ 82.843850] [<c02446c5>] driver_attach+0x15/0x20
[ 82.849333] [<c0244670>] __driver_attach+0x0/0x40
[ 82.854912] [<c02440f9>] bus_add_driver+0x69/0xc0
[ 82.860475] [<c01e728a>] __pci_register_driver+0x6a/0xa0
[ 82.866753] [<f881700f>] nv_init+0xf/0x12 [sata_nv]
[ 82.872515] [<c013820f>] sys_init_module+0x9f/0x1d0
[ 82.878293] [<c0103049>] syscall_call+0x7/0xb
[ 82.883474] Code: 24 30 8b 42 3c 8b 10 31 ed bb ff ff ff ff 89 d9 89 d7 89 e8 f2 ae f7 d1 49 89 ce 8b 44 24 30 8b 40 08 89 04 24 89 d9 89 c7 89 e8 <f2> ae f7 d1 49 68 d0 00 00 00 8d 4c 0e 02 51 e8 88 3c f0 ff 89
[ 82.907710] udevd-event[1667]: run_program: '/sbin/modprobe' abnormal exit
-------------- next part --------------
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 16:46:18 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a12120a0c0202
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
ht reset -
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 16:46:18 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0c020c
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00200000 KB
Ram3
dimm_mask = 00000011
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00113222
Addr Timing= 00202520
Initializing memory: done
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
Total DQS Training : tsc [00]=00000007e45c6166
Total DQS Training : tsc [01]=00000007e5a8fa85
Total DQS Training : tsc [02]=0000000852c0da4d
Total DQS Training : tsc [03]=0000000853e88c05
Ram4
v_esp=000ceec4
Copying data from cache to ram -- switching to use ram as stack... Done
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000cc84
linxbios_ram.bin length = 00021250
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_m57sli_Fallback Tue Mar 6 16:46:18 EST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 disabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
Done reading resources.
Allocating VGA resource PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 000b
PCI: 00:0a.0 cmd <- 147
PCI: 02:00.0 cmd <- 143
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 0003
PCI: 00:0f.0 cmd <- 140
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b
Final : tsc [0a]=00000008ca135631
Initializing CPU #0
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
Final : tsc [0b]=00000008da09e941
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 02:00.0 init
rom address for PCI: 02:00.0 = f6000000
copying VGA ROM Image from f6000000 to c0000, ee00 bytes
entering emulator
halt_sys: file /home/ward/lb/yh/freebios2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Adjust low_table_end from 0x00000500 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000500 - 00000db0 checksum f145
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candiate at offset 0
New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
(cleaned up) New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
(cleaned up) New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016168
Clearing Segment: addr: 0x000000007ff9a168 memsz: 0x0000000000027e98
Loading Segment: addr: 0x000000000013ff20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Loading Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20 filesz: 0x0000000000000000
Clearing Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20
Jumping to boot code at 0x10f768
FILO version 0.5 (ward at neuromancer) Tue Mar 6 14:58:22 EST 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x7ffe2120
collect_sys_info: boot arg = 0x7ffe2120
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000500
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000500
malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks)
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000007ff00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000080000000
collect_sys_info: RAM 2048 MB
relocate: Current location: 0x100000-0x13ff67
relocate: Relocating to 0x7ffc0090-0x7ffffff7... ok
setup_timers: CPU 2000 MHz
pci_init: Scanning PCI: found 25 devices
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
pci_init: 00:00.0 10de:0369 0500 00
pci_init: 00:01.0 10de:0360 0601 00
pci_init: 00:01.1 10de:0368 0c05 00
pci_init: 00:01.2 10de:036a 0500 00
pci_init: 00:01.3 10de:036b 0b40 00
pci_init: 00:02.0 10de:036c 0c03 10
pci_init: 00:02.1 10de:036d 0c03 20
pci_init: 00:04.0 10de:036e 0101 8a
pci_init: 00:05.0 10de:037f 0101 85
pci_init: 00:05.1 10de:037f 0101 85
pci_init: 00:05.2 10de:037f 0101 85
pci_init: 00:06.0 10de:0370 0604 00
pci_init: 00:06.1 10de:0371 0403 00
pci_init: 00:08.0 10de:0373 0680 00
pci_init: 00:0a.0 10de:0376 0604 00
pci_init: 00:0b.0 10de:0374 0604 00
pci_init: 00:0c.0 10de:0374 0604 00
pci_init: 00:0d.0 10de:0378 0604 00
pci_init: 00:0e.0 10de:0375 0604 00
pci_init: 00:0f.0 10de:0377 0604 00
pci_init: 00:18.0 1022:1100 0600 00
pci_init: 00:18.1 1022:1101 0600 00
pci_init: 00:18.2 1022:1102 0600 00
pci_init: 00:18.3 1022:1103 0600 00
pci_init: 02:00.0 10de:0392 0300 00
menu: hde1:/boot/grub/menu.lst
malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks)
file_open: dev=hde1, path=/boot/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488397168
init_drive: Init device params... ok
hde: LBA48 250GB: WDC WD2500JS-60NCB1
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 63 length 476230797
Mounted ext2fs
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press `ESC' to enter the menu... 2 Press `ESC' to enter the menu... 1 Press `ESC' to enter the menu... 0 Booting 'lbgNewSense, kernel 2.6.15-27-386'
root (hd4,0)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/hde1 ro noapic console=tty0 conso
le=ttyS0,115200
initrd /boot/initrd.img-2.6.15-27-386
boot
Booting 'hde1:/boot/vmlinuz-2.6.15-27-386 root=/dev/hde1 ro noapic console=tty0
console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-27-386'
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
malloc_diag: alloc: 600 bytes (6 blocks), free: 15776 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-27-386
devopen: already open
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 600 bytes (6 blocks), free: 15776 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-27-386
devopen: already open
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
Found Linux version 2.6.15-27-386 (root at sandbox) #1 PREEMPT Thu Dec 14 01:13:23 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-27-386"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 624 bytes (6 blocks), free: 15752 bytes (1 blocks)
parse_command_line: initrd=/boot/initrd.img-2.6.15-27-386
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x15783d
Loading kernel... ok
file_open: dev=<NULL>, path=/boot/initrd.img-2.6.15-27-386
load_initrd: start=0x1fa0b000 end=0x1ffff361
Loading initrd... ok
malloc_diag: alloc: 584 bytes (5 blocks), free: 15792 bytes (1 blocks)
start_linux: eip=0x100000
Jumping to entry point...
[17179569.184000] Linux version 2.6.15-27-386 (root at sandbox) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Dec 14 01:13:23 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
[17179569.184000] 1152MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 00000010
[17179569.184000] DMI not present.
[17179569.184000] ACPI: Unable to locate RSDP
[17179569.184000] Intel MultiProcessor Specification v1.4
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: GIGABYTE Product ID: M57SLI APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:11 APIC version 16
[17179569.184000] Processor #1 15:11 APIC version 16
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] I/O APIC #2 Version 17 at 0xF6144000.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[ 0.000000] Detected 2000.221 MHz processor.
[ 79.524132] Using tsc for high-res timesource
[ 79.525439] Console: colour VGA+ 80x25
[ 79.678926] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 79.687124] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 79.758135] Memory: 2069416k/2097152k available (1976k kernel code, 26620k reserved, 606k data, 288k init, 1179648k highmem)
[ 79.770495] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 79.858290] Calibrating delay using timer specific routine.. 4007.27 BogoMIPS (lpj=8014547)
[ 79.867573] Security Framework v1.0.0 initialized
[ 79.872784] SELinux: Disabled at boot.
[ 79.877042] Mount-cache hash table entries: 512
[ 79.882134] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 79.890308] CPU: L2 Cache: 512K (64 bytes/line)
[ 79.895523] mtrr: v2.0 (20020519)
[ 79.899380] CPU: AMD Processor model unknown stepping 02
[ 79.905548] Enabling fast FPU save and restore... done.
[ 79.911609] Enabling unmasked SIMD FPU exception support... done.
[ 79.918640] Checking 'hlt' instruction... OK.
[ 79.938834] checking if image is initramfs... it is
[ 80.393279] Freeing initrd memory: 6096k freed
[ 80.509244] NET: Registered protocol family 16
[ 80.514395] EISA bus registered
[ 80.518384] PCI: Using configuration type 1
[ 80.523466] ACPI: Subsystem revision 20051216
[ 80.528476] ACPI: Interpreter disabled.
[ 80.532937] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 80.539449] pnp: PnP ACPI: disabled
[ 80.543473] PnPBIOS: Scanning system for PnP BIOS support...
[ 80.550044] PnPBIOS: PnP BIOS support was not detected.
[ 80.556103] PCI: Probing PCI hardware
[ 80.561132] PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0
[ 80.569471] PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0
[ 80.577809] PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0
[ 80.586165] PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0
[ 80.594487] PCI: Unable to handle 64-bit address space for bridge 0000:00:0f.0
[ 80.603256] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
[ 80.610661] PCI: IRQ 0 for device 0000:00:06.1 doesn't match PIRQ mask - try pci=usepirqmask
[ 80.620519] PCI: Bridge: 0000:00:06.0
[ 80.624747] IO window: disabled.
[ 80.628677] MEM window: disabled.
[ 80.632696] PREFETCH window: disabled.
[ 80.637212] PCI: Bridge: 0000:00:0a.0
[ 80.641432] IO window: 1000-1fff
[ 80.645361] MEM window: f4000000-f60fffff
[ 80.650195] PREFETCH window: e0000000-efffffff
[ 80.655507] PCI: Bridge: 0000:00:0b.0
[ 80.659743] IO window: disabled.
[ 80.663662] MEM window: disabled.
[ 80.667683] PREFETCH window: disabled.
[ 80.672198] PCI: Bridge: 0000:00:0c.0
[ 80.676437] IO window: disabled.
[ 80.680365] MEM window: disabled.
[ 80.684387] PREFETCH window: disabled.
[ 80.688902] PCI: Bridge: 0000:00:0d.0
[ 80.693148] IO window: disabled.
[ 80.697076] MEM window: disabled.
[ 80.701097] PREFETCH window: disabled.
[ 80.705622] PCI: Bridge: 0000:00:0e.0
[ 80.709842] IO window: disabled.
[ 80.713770] MEM window: disabled.
[ 80.717791] PREFETCH window: disabled.
[ 80.722307] PCI: Bridge: 0000:00:0f.0
[ 80.726527] IO window: disabled.
[ 80.730455] MEM window: disabled.
[ 80.734485] PREFETCH window: disabled.
[ 80.739290] audit: initializing netlink socket (disabled)
[ 80.745510] audit(1141689611.628:1): initialized
[ 80.750858] highmem bounce pool size: 64 pages
[ 80.756023] VFS: Disk quotas dquot_6.5.1
[ 80.760588] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 80.768113] Initializing Cryptographic API
[ 80.772831] io scheduler noop registered
[ 80.777408] io scheduler anticipatory registered
[ 80.782754] io scheduler deadline registered
[ 80.787705] io scheduler cfq registered
[ 80.792355] pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
[ 80.800978] assign_interrupt_mode Found MSI capability
[ 80.806934] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[ 80.815562] assign_interrupt_mode Found MSI capability
[ 80.821505] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[ 80.830101] assign_interrupt_mode Found MSI capability
[ 80.836060] pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
[ 80.844658] assign_interrupt_mode Found MSI capability
[ 80.850606] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
[ 80.859206] assign_interrupt_mode Found MSI capability
[ 80.865148] pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
[ 80.873756] assign_interrupt_mode Found MSI capability
[ 80.879724] isapnp: Scanning for PnP cards...
[ 81.238455] isapnp: No Plug & Play device found
[ 81.251421] PNP: No PS/2 controller found. Probing ports directly.
[ 81.258666] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 81.264670] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 81.270427] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 81.279619] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 81.287843] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 81.296549] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 81.303833] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 81.313178] mice: PS/2 mouse device common for all mice
[ 81.319253] EISA: Probing bus 0 at eisa.0
[ 81.323889] Cannot allocate resource for EISA slot 1
[ 81.329638] Cannot allocate resource for EISA slot 2
[ 81.335370] Cannot allocate resource for EISA slot 3
[ 81.341096] EISA: Detected 0 cards.
[ 81.345160] NET: Registered protocol family 2
[ 81.364542] input: AT Translated Set 2 keyboard as /class/input/input0
[ 81.391415] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 81.400914] TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
[ 81.410656] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 81.418399] TCP: Hash tables configured (established 524288 bind 65536)
[ 81.426001] TCP reno registered
[ 81.429682] TCP bic registered
[ 81.433250] NET: Registered protocol family 1
[ 81.438266] NET: Registered protocol family 8
[ 81.443288] NET: Registered protocol family 20
[ 81.448405] Using IPI Shortcut mode
[ 81.452454] Freeing unused kernel memory: 288k freed
Begin: Loading essential drivers... ...
[ 81.498365] Capability LSM initialized
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
[ 81.891715] SCSI subsystem initialized
[ 81.897580] PCI: No IRQ known for interrupt pin A of device 0000:00:05.0. Please try using pci=biosirq.
[ 81.908380] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq 0
[ 81.916495] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq 0
[ 81.924603] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 81.933927] printing eip:
[ 81.937076] c0245454
[ 81.939634] *pde = 00000000
[ 81.942865] Oops: 0000 [#1]
[ 81.946092] PREEMPT
[ 81.948659] Modules linked in: sata_nv libata scsi_mod processor fbcon tileblit font bitblit softcursor capability commoncap
[ 81.961997] CPU: 0
[ 81.961998] EIP: 0060:[<c0245454>] Not tainted VLI
[ 81.961999] EFLAGS: 00010206 (2.6.15-27-386)
[ 81.975911] EIP is at make_class_name+0x34/0xc0
[ 81.981134] eax: 00000000 ebx: ffffffff ecx: ffffffff edx: f887cf10
[ 81.988919] esi: 00000009 edi: 00000000 ebp: 00000000 esp: df84fe08
[ 81.996695] ds: 007b es: 007b ss: 0068
[ 82.001400] Process modprobe (pid: 1668, threadinfo=df84e000 task=c21f7030)
[ 82.009153] Stack: 00000000 ffffffff ffffffff 00000056 df84fe52 c21ed000 00000246 f888ffc4
[ 82.019130] c21ed1f4 f888ffc4 f888ff60 c0245884 c21ed1f4 00000000 f888ffcc c21ed1f4
[ 82.029086] c21ed000 00000286 df8ca800 c024590b c21ed1f4 c21ed0d4 f887160f c21ed1f4
[ 82.039075] Call Trace:
[ 82.042147] [<c0245884>] class_device_del+0x84/0x100
[ 82.048018] [<c024590b>] class_device_unregister+0xb/0x20
[ 82.054393] [<f887160f>] scsi_remove_host+0xaf/0x130 [scsi_mod]
[ 82.061382] [<f8898b15>] ata_host_remove+0x15/0x30 [libata]
[ 82.067989] [<f8898fbb>] ata_device_add+0x20b/0x2a0 [libata]
[ 82.074652] [<f881d325>] nv_init_one+0x185/0x230 [sata_nv]
[ 82.081121] [<c01e6ffc>] __pci_device_probe+0x3c/0x60
[ 82.087088] [<c01e703f>] pci_device_probe+0x1f/0x40
[ 82.092858] [<c024457b>] driver_probe_device+0x3b/0xc0
[ 82.098922] [<c0244670>] __driver_attach+0x0/0x40
[ 82.104500] [<c02446ab>] __driver_attach+0x3b/0x40
[ 82.110201] [<c0243c58>] bus_for_each_dev+0x48/0x80
[ 82.115979] [<c02446c5>] driver_attach+0x15/0x20
[ 82.121472] [<c0244670>] __driver_attach+0x0/0x40
[ 82.127050] [<c02440f9>] bus_add_driver+0x69/0xc0
[ 82.132639] [<c01e728a>] __pci_register_driver+0x6a/0xa0
[ 82.138926] [<f881700f>] nv_init+0xf/0x12 [sata_nv]
[ 82.144713] [<c013820f>] sys_init_module+0x9f/0x1d0
[ 82.150492] [<c0103049>] syscall_call+0x7/0xb
[ 82.155673] Code: 24 30 8b 42 3c 8b 10 31 ed bb ff ff ff ff 89 d9 89 d7 89 e8 f2 ae f7 d1 49 89 ce 8b 44 24 30 8b 40 08 89 04 24 89 d9 89 c7 89 e8 <f2> ae f7 d1 49 68 d0 00 00 00 8d 4c 0e 02 51 e8 88 3c f0 ff 89
[ 82.179876] udevd-event[1667]: run_program: '/sbin/modprobe' abnormal exit
More information about the coreboot
mailing list