[LinuxBIOS] r372 - in LinuxBIOSv3/southbridge: amd/cs5536 intel/i82371eb

svn at openbios.org svn at openbios.org
Wed Jun 27 21:19:41 CEST 2007


Author: rminnich
Date: 2007-06-27 21:19:41 +0200 (Wed, 27 Jun 2007)
New Revision: 372

Added:
   LinuxBIOSv3/southbridge/amd/cs5536/dts
   LinuxBIOSv3/southbridge/intel/i82371eb/dts
Log:
dts needed to build.
Signed-off-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Stefan Reinauer <stepan at coresystems.de>



Added: LinuxBIOSv3/southbridge/amd/cs5536/dts
===================================================================
--- LinuxBIOSv3/southbridge/amd/cs5536/dts	                        (rev 0)
+++ LinuxBIOSv3/southbridge/amd/cs5536/dts	2007-06-27 19:19:41 UTC (rev 372)
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software = "0"; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation = "0"; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY = "0"; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program = "0"; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+{
+	constructor = "cs5536_constructors";
+	/* interrupt enables for LPC bus = "0"; each bit is an irq 0-15 */
+	lpc_serirq_enable = "0";
+	/* LPC IRQ polarity = "0"; each bit is an irq 0-15 */
+	lpc_serirq_polarity = "0";
+	/* 0:Continuous 1:Quiet */
+	lpc_serirq_mode = "0";
+	/* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. See virtual pci spec... */
+	enable_gpio_int_route = "0";
+	/* 0:IDE 1:FLASH, if you are using nand flash instead of IDE drive */
+	enable_ide_nand_flash = "0";
+	/* Enable USB Port 4 0:host 1:device */
+	enable_USBP4_device = "0";
+	/* 0:off, xxxx:overcurrent setting, e.g. 0x3FEA CS5536 - Data Book (pages 380-381) */
+	enable_USBP4_overcurrent = "0";
+	com1_enable = "0";
+	com1_address = "0x3f8";
+	com1_irq = "4";
+	com2_enable = "0";
+	com2_address ="0x2f8";
+	com2_irq = "3";
+
+};

Added: LinuxBIOSv3/southbridge/intel/i82371eb/dts
===================================================================
--- LinuxBIOSv3/southbridge/intel/i82371eb/dts	                        (rev 0)
+++ LinuxBIOSv3/southbridge/intel/i82371eb/dts	2007-06-27 19:19:41 UTC (rev 372)
@@ -0,0 +1,5 @@
+{
+	ide0_enable = "0";
+	ide1_enable = "0";
+	constructor = "i82371eb_constructors";
+};





More information about the coreboot mailing list