[LinuxBIOS] r2716 build service
LinuxBIOS information
info at coresystems.de
Thu Jun 7 23:38:18 CEST 2007
Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "uwe" checked in revision 2716 to
the LinuxBIOS source repository and caused the following
changes:
Change Log:
Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards.
Both are very similar, thus both use the JUKI-511P target.
Linux with patches from Juergen Beisert
(http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html)
boots and work fine (ide, usb, ethernet, serial, keyboard and sound
work normally).
Problems:
- Filo loads a bzImage only from ide0 (ide1 doesn't work yet).
- Video doesn't work, yet.
Signed-off-by: Nikolay Petukhov <nikolay.petukhov at gmail.com>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=hdama&vendor=arima
Configuration of artecgroup:dbe61 is still broken
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e326&vendor=ibm
Compilation of iei:juki-511p is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=juki-511p&vendor=iei
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8x&vendor=iwill
If something broke during this checkin please be a pain
in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
LinuxBIOS automatic build system
More information about the coreboot
mailing list