[LinuxBIOS] Added mainboard commell/lv671 and compile works, but ...

[Stefan Reinauer]

* Uwe Hermann <uwe at hermann-uwe.de> [070606 23:57]:
> Are you sure your hardware setup is working otherwise? Can you leave the
> null-modem cable attached as it is right now, but boot a normal Linux
> system on both ends of the cable? Then run minicom, 115200 BAUD on both
> sides, and test whether the trasmission itself works?
 
The south bridge code needs not only the SuperIO ports enabled but also
the COM1/COM2 ports. I think Corey's unified ICH code does this.


-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866