[LinuxBIOS] Added mainboard commell/lv671 and compile works, but ...

Uwe Hermann uwe at hermann-uwe.de
Wed Jun 6 23:57:40 CEST 2007

On Mon, Jun 04, 2007 at 11:42:44PM +0200, Dieter Bloms wrote:
>         /* Setup the console */
>         w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
>         uart_init();
>         console_init();
>         print_err("Hello\n");

Are you sure your hardware setup is working otherwise? Can you leave the
null-modem cable attached as it is right now, but boot a normal Linux
system on both ends of the cable? Then run minicom, 115200 BAUD on both
sides, and test whether the trasmission itself works?

Do you use real serial ports or some USB-to-serial thingy? I had some
problems with these devices in the past, a real serial port might be
more reliable...

http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070606/22198027/attachment.sig>

More information about the coreboot mailing list