[LinuxBIOS] Added mainboard commell/lv671 and compile works, but ...

Stefan Reinauer stepan at coresystems.de
Mon Jun 4 23:48:46 CEST 2007

* Dieter Bloms <dieter at bloms.de> [070604 23:42]:
> #include "superio/winbond/w83627hf/w83627hf.h"
> #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
> #include "superio/winbond/w83627hf/w83627hf_early_init.c"
> #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)

> w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
> > Is the SuperIO maybe listening on 4e instead of 2e?
> where can I see where the superio is listening on ?
Is your SuperIO a Winbond W83627HF? (Search the board for a chip close
to bios chip and the ports)

> I've changed the address from 2e to 4e in auto.c and Config.lb, but it
> didn't change anything.
Ok. This is bad. To some extent. Your southbridge is an ICH4, right?
I will go read the ICH4 data sheet some more on thursday to figure
something out.

I have a very similar problem with a very similar board, but I did not
try 4e yet. Chances are that it's a similar problem.

coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

More information about the coreboot mailing list