[LinuxBIOS] LinuxBIOS and VMWare

[Joe Pub]

Well then I have no idea what the problem is.  I have enabled the following
and taken the VGA BIOS out of the linuxbios.rom and the onboard device out
of the config.lb

default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1

and the VM still halts with no output to screen, or serial (if I use
CONFIG_CONSOLE_SERIAL8250).  As soon as I disable CONFIG_PCI_ROM_RUN then it
boots as normal.

I guess I need to get on the VMWare forum and see if there is a VMWare tech
there that can help.

Thanks for you help


On 28/02/07, Lu, Yinghai <yinghai.lu at amd.com> wrote:
>
>  Not needed for add-on card.
>
>
>
> YH
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070228/45bbb166/attachment.html>