[LinuxBIOS] LinuxBIOS and VMWare
Lu, Yinghai
yinghai.lu at amd.com
Wed Feb 28 20:03:44 CET 2007
Is the VGA device treated as add on card or onboard device in your HW
model?
In first case, the VGA BIOS is supposed to be loaded by HW model. Such
as qemu-i386, or xen start ...
YH
________________________________
From: Joe Pub [mailto:joepubber at googlemail.com]
Sent: Wednesday, February 28, 2007 10:52 AM
To: Lu, Yinghai
Cc: linuxbios at linuxbios.org
Subject: Re: [LinuxBIOS] LinuxBIOS and VMWare
Hi Lu,
I have changed the config as suggested, didn't realise that the PCI id's
had to be in numerical order. Different result with VMWare now, it
reports a triple fault within the VMWare log, but that it as much as I
can get from it, still no serial output when VGA is on
Regards,
Joe
On 28/02/07, Lu, Yinghai <yinghai.lu at amd.com> wrote:
chip northbridge/intel/i440bx
device pci_domain 0 on
device pci 0.0 on end # host bridge
device pci 1.0 on end # PCI bridge
device pci 10.0 on end # SCSI storage controller
device pci 11.0 on end # Ethernet controller
device pci 12.0 on end # Audio controller
device pci f.0 on # VGA controller
chip drivers/pci/onboard
device pci f.0 on end
register "rom_address" = "0xfff80000"
end
end
device pci 7.0 on # ISA bridge
end
end
= ==>
chip northbridge/intel/i440bx
device pci_domain 0 on
device pci 0.0 on end # host bridge
device pci 1.0 on end # PCI bridge
device pci 7.0 on # ISA bridge
end
chip drivers/pci/onboard
device pci f.0 on end
register "rom_address" = "0xfff80000"
end
device pci 10.0 on end # SCSI storage controller
device pci 11.0 on end # Ethernet controller
device pci 12.0 on end # Audio controller
end
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070228/bc73dd05/attachment.html>
More information about the coreboot
mailing list