[LinuxBIOS] [PATCH] Abit BE6-II V2.0 support

[Sergei Antonov]

On Dec 15, 2007 8:59 PM, ron minnich <rminnich at gmail.com> wrote:
>
> On Dec 14, 2007 3:00 PM, Sergei Antonov <saproj at gmail.com> wrote:
> >
> > On Dec 14, 2007 8:22 PM, ron minnich <rminnich at gmail.com> wrote:
> > > On Dec 13, 2007 12:12 AM, Sergei Antonov <saproj at gmail.com> wrote:
> > > > On Dec 13, 2007 2:06 AM, ron minnich <rminnich at gmail.com> wrote:
> > > > > On Dec 12, 2007 2:38 PM, Sergei Antonov <saproj at gmail.com> wrote:
> > > > >
> > > > > >
> > > > > > 1. The keyboard doesn't work. Here is a piece of log from the serial port:
> > > > > > =====================================
> > > > > > PNP: 03f0.5 init
> > > > > > Keyboard init...
> > > > > > Keyboard input buffer would not empty
> > > > > > =====================================
> > > > >
> > > > > hmm. Are you sure you know where the kb is connected?
> > > >
> > > > Pretty sure that I connected it to the PS/2 keyboard port.
> > >
> > > right, but which chip is that port connected to? There are multiple choices.
> >
> > Winbond W83977EF
>
> ok and, sorry to belabor this point, but the mainboard config you are
> using does set up this superio as the KB controller? IIRC you were
> using a different mainboard for this board you have. Sorry if I have
> lost the thread here. There are so many new 440bx mainboards coming up
> I'm losing track.

The src/mainboard/abit/be6-ii_v2_0/Config.lb Uwe gave me contains this string:
        chip superio/winbond/w83977tf	# Super I/O (FIXME: It's W83977EF!)
Is it an answer to your question?