[LinuxBIOS] alix and Artec LPC dongle [was: LPC.1A adapter?]

Peter Stuge peter at stuge.se
Thu Dec 6 06:35:55 CET 2007

On Thu, Dec 06, 2007 at 06:24:25AM +0100, Peter Stuge wrote:
>     GND 9 10 VCC3 in
> 441103-alix1c:
> 1-13 2-3 3-5 4-7 5-9 6-11 8-1 9-2/4/6/8/10/12/17 10-nc -15/18
> Note that the above cable can supply power to the LPC dongle.

Note that it can not. Sorry. I am too tired.

I left 10 not connected specifically to avoid the problem, since I
think I'll usually be powering the LPC dongle from USB.

The dongle needs 200ms or so to boot, so it has to be powered up
before the target board. I like pulling the power when trying a
newly flashed LB so dongle has to get power from somewhere else.


More information about the coreboot mailing list