[LinuxBIOS] flashrom fails on GA-M57SLI with 1MB ROM
Andreas B. Mundt
andi.mundt at web.de
Sun Dec 2 00:34:01 CET 2007
On Sat, Dec 01, 2007 at 10:11:36AM +0100, Andreas B. Mundt wrote:
> building a LAB-image with buildrom (I had to do this on an other
> 32-bit machine) flashing now works for me, too. I tried to find out
> why, but so far without success. Some configuration might differ?
I found the difference in the builds:
--- src/mainboard/gigabyte/m57sli/Config.lb (revision 2994)
+++ src/mainboard/gigabyte/m57sli/Config.lb (working copy)
@@ -310,7 +310,7 @@
# SIO pin set 1 input mode
#irq 0xc8 = 0x0
# SIO pin set 2 mixed input/output mode
- irq 0xc9 = 0x40
+ irq 0xc9 = 0x0
# SIO pin set 4 input mode
#irq 0xcb = 0x0
# Generate SMI# on EC IRQ
This has been changed in rev 2972. Buildrom has still the 'old'
version. Flashing works fine for me if irq 0xc9 = 0x0 is set. With irq
0xc9 = 0x40 it fails.
Could somebody check if flashing really works for some m57sli-boards
(LPC) with the latest revision (irq 0xc9 = 0x40)?
More information about the coreboot