[LinuxBIOS] [PATCH] v3: code documentation fixes
ron minnich
rminnich at gmail.com
Thu Aug 30 17:11:22 CEST 2007
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
On 8/29/07, Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net> wrote:
> Correct typo, fix stage2 code documentation, add dtsname printing to
> differentiate between identically named objects during boot.
>
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
>
> Index: LinuxBIOSv3/include/device/device.h
> ===================================================================
> --- LinuxBIOSv3/include/device/device.h (Revision 485)
> +++ LinuxBIOSv3/include/device/device.h (Arbeitskopie)
> @@ -202,7 +202,7 @@
> struct resource resource[MAX_RESOURCES];
> unsigned int resources;
>
> - /* link are (down sream) buses attached to the device, usually a leaf
> + /* link are (downstream) buses attached to the device, usually a leaf
> * device with no children have 0 buses attached and a bridge has 1 bus
> */
> struct bus link[MAX_LINKS];
> Index: LinuxBIOSv3/device/device.c
> ===================================================================
> --- LinuxBIOSv3/device/device.c (Revision 485)
> +++ LinuxBIOSv3/device/device.c (Arbeitskopie)
> @@ -260,8 +260,10 @@
> for (curdev = bus->children; curdev; curdev = curdev->sibling) {
> unsigned int links;
> int i;
> - printk(BIOS_SPEW, "%s: %s(%s) have_resources %d enabled %d\n",
> + printk(BIOS_SPEW,
> + "%s: %s(%s) dtsname %s have_resources %d enabled %d\n",
> __func__, bus->dev->dtsname, dev_path(bus->dev),
> + curdev->dtsname,
> curdev->have_resources, curdev->enabled);
> if (curdev->have_resources) {
> continue;
> Index: LinuxBIOSv3/lib/stage2.c
> ===================================================================
> --- LinuxBIOSv3/lib/stage2.c (Revision 485)
> +++ LinuxBIOSv3/lib/stage2.c (Arbeitskopie)
> @@ -31,8 +31,9 @@
> /**
> * Main function of the DRAM part of LinuxBIOS.
> *
> - * LinuxBIOS is divided into pre-DRAM part and DRAM part. The phases before
> - * this part are phase 0 and phase 1. This part contains phases x through y.
> + * LinuxBIOS is divided into pre-DRAM part and DRAM part. The stages before
> + * this part are stage 0 and stage 1. This part contains stage 2, which
> + * consists of phases 1 through 6.
> *
> * Device Enumeration: in the dev_enumerate() phase.
> *
> @@ -53,6 +54,7 @@
>
> post_code(0x20);
>
> + /* TODO: Explain why we use printk here although it is impossible */
> printk(BIOS_NOTICE, console_test);
>
> dev_init();
>
>
>
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list