[LinuxBIOS] Problems with Intel vga working
Joseph Smith
joe at smittys.pointclark.net
Mon Aug 20 08:27:55 CEST 2007
Hello,
I have followed the vga support documentaion to a "T" but I don't get
any vga output when I boot, only serial. I have tried several
different ersions of the vga rom with no luck. Has anyone else had any
success with integrated vga on an Intel board? Is there anyway to
debug this to find out what is happening?
Here is my lspci -v:
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC
[Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA])
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset
Graphics Controller]
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at ff980000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Here is what my Conif.lb looks like:
device pci 2.0 on # VGA compatible controller: Intel
Corporation 82830 CGC
chip drivers/pci/onboard
device pci 2.1 on end # Display controller: Intel Corporation 82830 CGC
register "rom_address" = "0xfff80000"
end
end
Thanks - Joe
More information about the coreboot
mailing list