[LinuxBIOS] IDE become readonly, why?

Beneo beneo at comcast.net
Mon Apr 9 19:02:15 CEST 2007


For the RTC patch, it is porting for a SMSC SIO, I didn't see LinuxBIOS has 
this SIO porting. The part number is SCH--4703, I don't know how to 
contribute it to LinuxBIOS tree.

I haven't get the chance to take look at my NIC issue yet, I will certainly 
check the interrupt when I get the chance.



----- Original Message ----- 
From: "Peter Stuge" <stuge-linuxbios at cdy.org>
To: <linuxbios at linuxbios.org>
Sent: Friday, April 06, 2007 9:00 PM
Subject: Re: [LinuxBIOS] IDE become readonly, why?

> Hi Beneo,
> On Fri, Apr 06, 2007 at 06:58:22PM -0700, Beneo wrote:
>> Thanks for the tips, I get it working.
> Glad to hear it!
>> I searched the Linux startup script, it is a RTC related, I rememer
>> it is something related to Daylight saving, so I go check the RTC,
>> found the IRQ for that RTC is not programmed, once I get that
>> programmed, it can boot all the way now.
> Aha! Could you provide a patch for the RTC IRQ issue?
>> I still have a network issue, my network card can not be get a IP
>> address from a DHCP server, I'm relatively sure the IRQ in MP table
>> is assigned correctly, not sure why it hang yet. Other than that,
>> it looks OK.
> Hm. You can check if interrupts are coming through by configuring an
> IP address manually and sending some pings, and then:
> cat /proc/interrupts
>> Thanks for the help
> I'm glad it works. :)
> //Peter
> -- 
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios

More information about the coreboot mailing list