[LinuxBIOS] IDE become readonly, why?

Beneo beneo at comcast.net
Sat Apr 7 03:58:22 CEST 2007


Thanks for the tips, I get it working.
I searched the Linux startup script, it is a RTC related, I rememer it is 
something related to Daylight saving, so I go check the RTC, found the IRQ 
for that RTC is not programmed, once I get that programmed, it can boot all 
the way now.

I still have a network issue, my network card can not be get a IP address 
from a DHCP server, I'm relatively sure the IRQ in MP table is assigned 
correctly, not sure why it hang yet. Other than that, it looks OK.

Thanks for the help


----- Original Message ----- 
From: "Peter Stuge" <stuge-linuxbios at cdy.org>
To: <linuxbios at linuxbios.org>
Sent: Thursday, April 05, 2007 5:37 PM
Subject: Re: [LinuxBIOS] IDE become readonly, why?

> On Thu, Apr 05, 2007 at 04:53:39PM -0700, Beneo wrote:
>> I kept the Linux hang at that point for 2 or 3 hours, so I think
>> it probably would not go anywhere if I don't do something.
> Wow, ok, I think you are right. :)
>> thanks for the suggestion, I will search and check what Linux is
>> doing when it hang, I will let you know.
> Cool. Since you didn't post what happens up to the hanging point I
> can't say for sure if it's in the initrd, but I think it probably is.
> //Peter
> -- 
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios

More information about the coreboot mailing list