[LinuxBIOS] MSI ms9282 with etherboot restart again and again

bxshi at msik.com.cn bxshi at msik.com.cn
Mon Sep 18 13:24:24 CEST 2006

Dear  Dr. Lu,

I tried to boot kernel on ide hdd with etherboot ,  but after it shown
"Jumping to entry point " , it restart again and again. (the log is
below) ? what maybe  the problem?

And is there any good news for Nvidia mcp55?





Etherboot 5.4.2 (GPL) http://etherboot.org

Drivers: TG3 FILO   Images: NBI ELF

Protocols: DHCP TFTP

Relocating _text from: [000100e0,000682d0) to [3fea7e10,3ff00000)

Boot from (N)etwork (D)isk or (Q)uit?


Probing pci nic...

Probing isa nic...

Probing pci disk...

[FILO]FILO version 0.4.1 (root at suse101) Mon Sep 18 18:52:42 CST 2006

Press <Enter> for default boot, or <Esc> for boot prompt... timed out

boot: hda1:/vmlinuz-2.4.20-6smp initrd=/initrd-2.4.20-6smp.img ro
root=/dev/hda2 console=tty0 console=ttyS0,10


Mounted ext2fs

Found Linux version 2.4.20-6smp (bhcompile at sylvester.devel.redhat.com)
#1 SMP Thu Feb 27 09:36:38 EST 2003 bz.

Loading kernel... ok

Loading initrd... ok

Jumping to entry point...


INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---


Issuing SOFT_RESET...


This email is intended only for the use of the person or entity to whom it is addressed and contains information that may be subject to and/or may be restricted from disclosure by contract or applicable  law. If you are not the intended recipient of this email, be advised that any disclosure, copy, distribution or use of the contents of this message is strictly prohibited. If you are not the intended recipient of this email, please notify the sender that you have received this in error by replying to this message. Then, please delete it from your system. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060918/a218ab35/attachment.html>

More information about the coreboot mailing list