[LinuxBIOS] Via epia-m2 difficulties
smithbone at gmail.com
Fri Nov 10 04:35:37 CET 2006
Kurt André Selbach wrote:
> uhc_init: uhc_init setting framelist to: 1decb9f0
> uhc_start: Starting UHCI
> dump_uhci: HCI at 00001800
> uhc_init: Found UHCI at 1820
> uhc_reset: Resetting UHCI"
> The computer now "hangs" no boot nothing.
> Using the filo from ehterboot, it get's to the "LinuxLabs USB
> bootloader" and that's as far as it goes.
> Stock award bios managed to boot from this usbstick,
> What could be wrong, any suggestions?!
Run the memtest86 payload and make sure your RAM is solid.
Richard A. Smith
More information about the coreboot