[LinuxBIOS] Via epia-m2 difficulties

Kurt André Selbach kurtandre at gmail.com
Fri Nov 10 04:32:43 CET 2006

Thanks, for the answers, i managed to get the vgabios running when i
inserted the extracted vgabios (from awardeco) and inserted it with
the dd command.

My next problem is trying to boot from my usb device using FILO version 0.5
from this "link" svn://openbios.org/filo/trunk/filo-0.5

"FILO version 0.5 (root at powertron) Fri Nov 10 02:05:10 CET 2006
Press <Enter> for default boot, or <Esc> for boot prompt... 1mlinuz
root=/dev/sda1 console=tty0 console=ttyS0nd UHCI at 1800
uhc_reset: Resetting UHCI
uhc_init: uhc_init setting framelist to: 1decb9f0
uhc_start: Starting UHCI
dump_uhci: HCI at 00001800
uhc_init: Found UHCI at 1820
uhc_reset: Resetting UHCI"

The computer now "hangs" no boot nothing.

Using the filo from ehterboot, it get's to the "LinuxLabs USB
bootloader" and that's as far as it goes.

Stock award bios managed to boot from this usbstick,
What could be wrong, any suggestions?!

Thanks in advance
Best regards

More information about the coreboot mailing list