[LinuxBIOS] USB Bootloader

Stefan Reinauer stepan at coresystems.de
Thu Nov 2 11:32:44 CET 2006


* jean raymond <jeanraymond19769earrond at hotmail.com> [061102 07:53]:
> Hello,
> 
> I tried filo 0.4 from openbios.org, which was able to ide boot but hangs
> on usb boot with this:
 
Interesting... There is no filo 0.4 on openbios.org ;-) Only 0.5...
 
> n_type: 00000001 n_name(8): ELFBoot  n_desc(10): Etherboot
> n_type: 00000002 n_name(8): ELFBoot  n_desc(6): 5.4.2
> Loading Etherboot version: 5.4.2

So you are using etherboot from etherboot.org? 

Yinghai, can you help?


> Boot from (N)etwork (D)isk or (Q)uit? D
 
> FILO version 0.4.1 (root at frlanzf00595) Tue Oct 31 17:00:24 CET 2006
> Press <Enter> for default boot, or <Esc> for boot prompt...
> boot: uda1:/bzImage root=/dev/sda2 console=tty0 console=ttyS0,115200
> dev=uda1, path=/bzImage
> name = uda1, type = 3, drive = 0, part = 1, offset = 0x00000000, length = 
> 0x00000000
> LinuxLabs USB bootloader
> Resetting UHCI
> uhc_init setting framelist to: 000101b0
> Starting UHCI
> HCI at 000030c0
> Resetting UHCI
> uhc_init setting framelist to: 000101b0
> Starting UHCI
> HCI at 000030e0
> frame_list is at bffede50
> frame_list_link: addr: fffefe50
> frame_list_link:  raw addr: 00000800
> frame_list_link: terminate: 00000000
> frame_list_link: queue: 00000000
> frame_list_link: depth: 00000000
> frame_list is at bffebe50
> frame_list_link: addr: ffff0650
> frame_list_link:  raw addr: 00000040
> frame_list_link: terminate: 00000000
> frame_list_link: queue: 00000000
> frame_list_link: depth: 00000000
> New USB device, setting address 2
> port = 0x000030d0       controller =0x00000000  lowspeed = 0    next_usb_dev 
> = 0x00000003       addr = 0x00000002
> uhci_control_msg: request_type = 00000000 request = 00000005 wLength=0
> ctrl_msg( 00000000, 00000000, 00000005, 00000002, 00000000, 00000000, p)
> 0 bytes in payload
> lowspeed = u
> HCI at 000030c0
> failed_transaction: TD(0002e5a0):
> failed_transaction: type: SETUP
> failed_transaction: retries: 00000003
> failed_transaction: IOC
> failed_transaction: active: 00000001
> failed_transaction: device_addr: 00000000
> failed_transaction: endpoint: 00000000
> failed_transaction: data_toggle: 00000000
> failed_transaction: max_transfer: 00000007
> failed_transaction: actual: 00000000
> failed_transaction: link:
>         failed_transaction: addr: 0002e5c0
>         failed_transaction:  raw addr: 0003e770
>         failed_transaction: terminate: 00000000
>         failed_transaction: queue: 00000000
>         failed_transaction: depth: 00000000
> failed_transaction: TD(0002e5c0):
> failed_transaction: type: IN
> failed_transaction: retries: 00000000
> failed_transaction: active: 00000001
> failed_transaction: device_addr: 00000000
> failed_transaction: endpoint: 00000000
> failed_transaction: data_toggle: 00000001
> failed_transaction: max_transfer: 000007ff
> failed_transaction: actual: 00000000
> failed_transaction: link:
>         failed_transaction: addr: fffefe50
>         failed_transaction:  raw addr: 00000000
>         failed_transaction: terminate: 00000001
>         failed_transaction: queue: 00000000
>         failed_transaction: depth: 00000000
> configure_device: set_address failed!
> value = 0x00001080
> poll_usb 1      hc_type[1] = 00000000
> 
> ...
 
 
> There is a USB device, but it won't init! This is a bad thing.
 
> failed to open usb
> boot: uda1:/bzImage root=/dev/sda2 console=tty0 console=ttyS0,115200
 
What board are you using, what LinuxBIOS revision,...? 

> Now, how can etherboot-filo be fixed to boot at all?
> And, how can filo 0.5 be fixed to boot USB?
 
What's the error you are seeing with filo 0.5?

Stefan

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/




More information about the coreboot mailing list