[LinuxBIOS] Question about AMD/Cyrix Geode GX1 based system
Stefan Reinauer
stepan at coresystems.de
Mon May 29 20:26:08 CEST 2006
* Juergen Beisert <juergen127 at kreuzholzen.de> [060529 18:37]:
> With write enabled E and F segments this message changes to:
> ....
> Devices initialized
> Copying IRQ routing tables to 0xf0000...done.
> Verifing copy of IRQ routing tables at 0xf0000...done
> Checking IRQ routing table consistency...
> check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
> done.
Can you provide a patch?
> But it still hangs after downloading the Linux kernel :-(
Have you enabled serial console in your kernel config?
and did you specify it on the kernel command line? (ie.
console=ttyS0,115200n8)
Stefan
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot
mailing list