[LinuxBIOS] s2881 fan control

[Lu, Yinghai]

init() in amd8111_acpi.c

YH

-----Original Message-----
From: Ward Vandewege [mailto:ward at gnu.org] 
Sent: Thursday, May 11, 2006 1:45 PM
To: Stefan Reinauer
Cc: linuxbios at linuxbios.org; Lu, Yinghai
Subject: Re: [LinuxBIOS] s2881 fan control

On Tue, May 09, 2006 at 03:05:07PM -0400, Ward Vandewege wrote:
... lspci output ...
> But there are actually quite a few other differences throughout the
file,
> which surprises me a litte. Lots of differences in the various
northbridge
> entries, and even the network cards and the sata controller. Is this
normal?

A followup on this. First of all, I didn't realize that the PCI
configuration
space is dynamic - things change all the time.

Secondly; 

>  0000:01:04.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev
05)
... snip ...
> -f0: 19 5f 3b 00 00 00 00 00 00 00 00 00 00 00 00 00
> +f0: c3 ad 1e 00 00 00 00 00 00 00 00 00 00 00 00 00

As it turns out, those three bytes change constantly, so I guess they
are not
significant.

Also, I missed one byte that IS consistently different after a boot with
the
proprietary BIOS:

0000:01:04.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
...
-40: 80 f1 00 04 00 00 00 00 20 14 50 00 00 00 00 00
+40: 80 f1 00 07 00 00 00 00 20 14 50 00 00 00 00 00

How would I go about changing that byte during the LinuxBIOS boot? Do I
need
to edit resourcemap.c in src/mainboard/tyan/s2881?

Thanks,
Ward.

-- 
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator