[LinuxBIOS] MB1030 / 3036 VGA resume

Stefan Reinauer stepan at coresystems.de
Thu May 11 16:40:32 CEST 2006

* Christian Sühs <chris at suehsi.de> [060511 15:54]:
> It seems, I have to write my own entry16.inc code for the gx1.
> The default entry16.inc should enable the cache for example, but there 
> are written false values to the cr0 register.
no. very very unlikely. Just write the correct values in auto.c is
> >Ok, for the GX1 the EM is set to 0; Emulate Processor Extension, if EM = 
> >1 all flaoting point instructions causes a DNA fault 7
> This is done twice for the gx1.
> First in entry16.inc
> Later with enable_fpu.inc
> Is it posible to remove the line from the Config.lb for the fpu?

Possibly possible, if the gx1 does all that.. But this will not take
more than a couple cycles, so the difference in size and time is not
measurable without quite some effort.

coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/

More information about the coreboot mailing list