[LinuxBIOS] MB1030 / 3036 VGA resume
chris at suehsi.de
Tue May 9 18:07:34 CEST 2006
Richard Smith schrieb:
>>What about the Config.lb under the mainboard folder.
>>Most Boards enables the apic cluster, the eaglelion/5bcm does not.
> Do you have an apic?
Well I don't think so ;)
I'm not really sure what this is, i.e in the epia-m Config.lb is it
enabled too, has/is the epia-m an apic?
Means apic, some boards get together in a cluster ??
>>I think all devices should be init, which are set to on in the Config file.
>>However, the CPU is not init by LB and therefor there is no L1 cache.
>>Can somebody have a second look to the eaglelion Config.lb under the
>>mainboard folder. The file could be wrong.
> What boards are you comparing against?
It seems that almost any board has enabled apic in the Config.lb
> I haven't had a chance to look at the registers you listed for the CPU
> datasheet. But my suggestion would be to just try them and see what
Yeah, I have tried these and that, but nothing helps. Currently I think
that the GX1 L1 cache is disabled. Because it seems that the CPU is not
init by LinuxBios on startup.
Last, I don't know how I should set those special cpu registers.
> Richard A. Smith
More information about the coreboot