[LinuxBIOS] Can anyone confirm if linuxbios works on EPIA PD10000?

[Christian Sühs]

Matt schrieb:
> Hi
> Im new to the list, so apoligise if this has been asked before :(
> I use the EPIA PD10000 boards for various projects and would like to use linux bios on the boards, the PD range is not listed on the site, so i thought id ask here :)
> I understand that video can be a problem with the EPIA boards but all i realy want is a serial output :)
>

Should work with epia-m as target, its almost the same hardware.

> The PD10000 board has the following chipsets :-
> # Processor   	VIA C3™/ VIA Eden™ EBGA processor
> # Chipset 	VIA CLE266 North Bridge
> # VIA VT8235 South Bridge
> # System Memory 	1 DDR266 DIMM socket
> # Up to 1GB memory size
> # VGA 	Integrated VIA UniChrome™ AGP graphics with MPEG-2 Accelerator
> # Expansion Slots 	1 PCI
> # Onboard IDE 	2 X UltraDMA 133/100/66 Connector
> # Onboard LAN 	VIA VT6105 LOM+VT6103 10/100 Base-T Ethernet PHY
> # Onboard Audio 	VIA VT1612A 2 channel AC' 97 codec
> # Award BIOS
> # 2/4Mbit flash memory
> # CPU voltage monitoring
> # Wake-on-LAN, Keyboard Power-on, Timer Power-on
> # System power management
> # AC power failure recovery
> (data taken from VIA website : http://www.via.com.tw/en/products/mainboards/mini_itx/epia_pd/)
> 


>