[LinuxBIOS] s2881 build broken

Lu, Yinghai yinghai.lu at amd.com
Thu May 4 01:27:33 CEST 2006

That should be double skip length problem..., remove one +4 in
copy_and_run.c could make it work.


-----Original Message-----
From: linuxbios-bounces at linuxbios.org
[mailto:linuxbios-bounces at linuxbios.org] On Behalf Of Stefan Reinauer
Sent: Wednesday, May 03, 2006 4:12 PM
To: Ward Vandewege
Cc: linuxbios at linuxbios.org
Subject: Re: [LinuxBIOS] s2881 build broken

* Ward Vandewege <ward at gnu.org> [060504 00:39]:
> Hi all,
> It seems that revision 2288 broke something in the tyan/s2881 build;
2289 and
> 2290 are also bad. 2287 is ok.
> Boot log attached; it just keeps rebooting after the 'Jumping to
> line. This is gcc 3.4.
> Suggestions?

Yes, I suggest I owe you a beer next time we meet and you try 2291.

Yinghai Lu has sent a patch that is more complete but also more
intrusive, which will go in later I guess. Until then this should work

This one is a good reason for automated testing on hardware.. 8)


coresystems GmbH * Brahmsstr. 16 * D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 * Fax: +49 761 7664613
Email: info at coresystems.de  * http://www.coresystems.de/

linuxbios mailing list
linuxbios at linuxbios.org

More information about the coreboot mailing list