[LinuxBIOS] MB1030 / 3036 VGA comes up :D
Stefan Reinauer
stepan at coresystems.de
Wed May 3 14:38:39 CEST 2006
* Christian Sühs <chris at suehsi.de> [060503 15:21]:
> >
> > * If yes, whats the difference to LinuxBIOSv1 here, because I seem to
> > remember we did not have such a problem back then.
>
>
> I have catched the Kernel output for both Bioses
> (attachement)
>
> There are some differents for the memory configuration.
Ok, one thing is you can change this:
#define FRAMEBUFFERK 4096
to
#define FRAMEBUFFERK 0
in
src/northbridge/amd/gx1/northbridge.c. But this will do nothing but gain
you the 4 Megabytes of RAM that are normally reserved for the onchip vga
(which you dont use anyways)
> hm, page 00000000 reserved twice. // what does it mean
good question. Anyone?
> DMI not present. // Why not ?
Because its not needed. We dont do DMI but we have a mechanism called
the "LinuxBIOS table"
LinuxBIOS:
> PCI: Using IRQ router NatSemi [1078/0100] at 00:12.0
> PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x10)
factory:
> PCI: Using IRQ router NatSemi [1078/0100] at 00:12.0
... Ok. other attempt.
Boot up with LinuxBIOS and boot up with factory bios, and do
lspci -xxx > pcioutput.txt
as root.
Then send the two files to this list.
Stefan
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot
mailing list