[LinuxBIOS] Epia ML 5000 VGA (Again!) -- Moving backwards, somehow.

[Daniel Parthey]

Eric Poulsen schrieb:
> I went back to the "stock" LinuxBIOSv2, revision 2100, known to 
> work with the Epia M.  This particular revision worked for me, albeit 
> with the long delay at the beginning because of the firewire search.
> 
> Essentially, whenever, I add ...
> 
>     #VGA Console
>     option CONFIG_CONSOLE_VGA=1
>     option CONFIG_PCI_ROM_RUN=1
> 
> .... to the Config.lb, it doesn't work, giving the error below.
> 
> Any ideas?
> 
> --------------------------------------------------------------------
> 
> [...]
> VGA random fixup ...
> INSTALL REAL-MODE IDT
> DO THE VGA BIOS
> found VGA: vid=1106, did=3122
> rom base, size: fffc0000
> write_protect_vgabios
  ^^^^^^^^^^^^^^^^^^^^^
Did you change the line in mainboard.c from
 dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0);
to
 dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CLE266_VGA, 0);
in order to write-protect the vgabios correctly?

> bus/devfn = 0x100
> Unexpected Exception: 13 @ 10:000121c3 - Halting
> Code: 0 eflags: 00010012
> eax: 00000012 ebx: 00024530 ecx: 00023fa8 edx: 00000012
> edi: 00018a90 esi: ffff946b ebp: 00023f84 esp: 00023f84

Daniel.
-- 
Jabber: pada at jabber.ccc.de