[LinuxBIOS] Firmware hub parts

Richard Smith smithbone at gmail.com
Tue Mar 21 15:47:01 CET 2006

On 3/21/06, Bari Ari <bari at onelabs.com> wrote:

> What model number is your SOM? PCM-58xx seems to be the range of model
> numbers for their AMD Geode boards.


> Does your board have an IDE interface?


> If so, you should be able to have it boot from flash/ide by swapping a
> couple resistors on the board.

I found the resistors on the schematic.  Finding them among the 0402s
on the board will be a challenge...

Richard A. Smith

More information about the coreboot mailing list