[LinuxBIOS] Firmware hub parts

Bari Ari bari at onelabs.com
Tue Mar 21 05:35:43 CET 2006

If you are using the 5535 thin client reference design then you can make 
a couple of pin strap changes and have the board boot from the ide/flash 
interface vs the FWH.


Richard Smith wrote:
> I got my eval board today.  The bios chip is a sst 49LF002A which is a
> firmware hub part.
> My ROM emulator won't work. :(
> My programmer will program the parts but that means I'm swapping chips
> every cycle which sucks.
> Do all the GX2 parts use firmware hubs?
> What are my non-programmer options for flashing this part?
> --
> Richard A. Smith

More information about the coreboot mailing list