[LinuxBIOS] tyan s2881 - partial success (update)

Ward Vandewege ward at gnu.org
Fri Jan 6 16:49:32 CET 2006


On Tue, Jan 03, 2006 at 04:50:39PM -0800, Lu, Yinghai wrote:
> Can you try with single HD instead of RAID5?

I haven't tried that yet, but I just tried after having the raid array
rebuilt running the proprietary BIOS.

The serial log is attached. It took longer now to crash, just as I observed
the first time I succesfully booted LinuxBIOS. I got a login prompt and
things worked fine for a few minutes. After that, the same thing: serial log
shows that the fallback image is being restarted, and the machine just hangs.

In other words, heavy disk activity (sw-raid5 rebuilding) seems to trigger the
crashes more quickly than otherwise.

Thanks,
Ward.

--
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
-------------- next part --------------


LinuxBIOS-1.1.8_s2881_Fallback Tue Jan  3 17:36:16 EST 2006 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02
ht reset -


LinuxBIOS-1.1.8_s2881_Fallback Tue Jan  3 17:36:16 EST 2006 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02
Ram1.00
Ram1.01
Ram2.00
Ram2.01
Ram3
Initializing memory:  done
Initializing memory:  done
Ram4
v_esp=000cfd40
cpu_reset = 00000000
Clearing initial memory region: No cache as ram now - Use Ram as Stack now - done
new_cpu_reset = 00000000
Copying LinuxBIOS to ram.
src=fffe0004
dst=00004000
linxbios_ram.bin length = 0001928c
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_s2881_Fallback Tue Jan  3 18:10:55 EST 2006 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
  PCI: 00:19.3 siblings=1
CPU: APIC: 02 enabled
CPU: APIC: 03 enabled
PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
PCI: 01:00.0 [1022/7450] enabled
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:00.0 [1022/7460] enabled
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
PCI: pci_scan_bus for bus 1
PCI: 01:01.0 [1022/7450] enabled
PCI: 01:01.1 [1022/7451] enabled
PCI: 01:02.0 [1022/7450] enabled
PCI: 01:02.1 [1022/7451] enabled
PCI: 01:03.0 [1022/7460] enabled
PCI: 01:04.0 [1022/7468] enabled
PCI: 01:04.1 [1022/7469] enabled
PCI: 01:04.2 [1022/746a] enabled
PCI: 01:04.3 [1022/746b] enabled
PCI: pci_scan_bus for bus 2
PCI: 02:09.0 [14e4/1648] enabled
PCI: 02:09.1 [14e4/1648] enabled
Disabling static device: PCI: 02:0a.0
Disabling static device: PCI: 02:0a.1
PCI: pci_scan_bus returning with max=02
PCI: 02: 100MHz PCI-X
PCI: pci_scan_bus for bus 3
PCI: pci_scan_bus returning with max=03
PCI: 03: 133MHz PCI-X
PCI: pci_scan_bus for bus 4
PCI: 04:00.0 [1022/7464] enabled
PCI: 04:00.1 [1022/7464] enabled
PCI: 04:05.0 [1095/3114] enabled
PCI: 04:06.0 [1002/4752] enabled
PCI: pci_scan_bus returning with max=04
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
smbus: PCI: 01:04.3[0]->I2C: 01:50 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:51 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:52 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:53 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:54 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:55 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:56 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:57 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:2d enabled
smbus: PCI: 01:04.3[0]->I2C: 01:2a enabled
smbus: PCI: 01:04.3[0]->I2C: 01:49 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:4a enabled
PCI: pci_scan_bus returning with max=04
PCI: pci_scan_bus returning with max=04
done
Allocating resources...
Reading resources...
PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io
PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem
PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 4 prefmem
Done reading resources.
Setting resources...
PCI: 00:18.0 1ba <- [0x00fd300000 - 0x00fd2fffff] prefmem <node 0 link 2>
PCI: 00:18.0 1c2 <- [0x0000001000 - 0x0000002fff] io <node 0 link 2>
PCI: 00:18.0 1b2 <- [0x00fc000000 - 0x00fd2fffff] mem <node 0 link 2>
PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] bus 2 mem
PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] mem64
PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] mem64
PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] mem64
PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] mem64
PCI: 01:01.1 10 <- [0x00fd200000 - 0x00fd200fff] mem64
PCI: 01:02.1 10 <- [0x00fd201000 - 0x00fd201fff] mem64
PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 4 io
PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 4 mem
PCI: 04:00.0 10 <- [0x00fd000000 - 0x00fd000fff] mem
PCI: 04:00.1 10 <- [0x00fd001000 - 0x00fd001fff] mem
PCI: 04:05.0 10 <- [0x0000001410 - 0x0000001417] io
PCI: 04:05.0 14 <- [0x0000001430 - 0x0000001433] io
PCI: 04:05.0 18 <- [0x0000001420 - 0x0000001427] io
PCI: 04:05.0 1c <- [0x0000001440 - 0x0000001443] io
PCI: 04:05.0 20 <- [0x0000001400 - 0x000000140f] io
PCI: 04:05.0 24 <- [0x00fd003000 - 0x00fd0033ff] mem
PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem
PCI: 04:06.0 14 <- [0x0000001000 - 0x00000010ff] io
PCI: 04:06.0 18 <- [0x00fd002000 - 0x00fd002fff] mem
PCI: 04:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq
PCI: 01:04.1 20 <- [0x0000002420 - 0x000000242f] io
PCI: 01:04.2 10 <- [0x0000002400 - 0x000000241f] io
PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resourcess...
PCI: 00:18.0 cmd <- 140
PCI: 01:01.0 bridge ctrl <- 0003
PCI: 01:01.0 cmd <- 146
PCI: 02:09.0 subsystem <- 10f1/2881
PCI: 02:09.0 cmd <- 142
PCI: 02:09.1 subsystem <- 10f1/2881
PCI: 02:09.1 cmd <- 142
PCI: 01:01.1 subsystem <- 10f1/2881
PCI: 01:01.1 cmd <- 146
PCI: 01:02.1 subsystem <- 10f1/2881
PCI: 01:02.1 cmd <- 146
PCI: 01:03.0 bridge ctrl <- 0003
PCI: 01:03.0 cmd <- 147
PCI: 04:00.0 subsystem <- 10f1/2881
PCI: 04:00.0 cmd <- 142
PCI: 04:00.1 subsystem <- 10f1/2881
PCI: 04:00.1 cmd <- 142
PCI: 04:05.0 subsystem <- 10f1/2881
PCI: 04:05.0 cmd <- 143
PCI: 04:06.0 subsystem <- 10f1/2881
PCI: 04:06.0 cmd <- 1c3
PCI: 01:04.0 subsystem <- 10f1/2881
PCI: 01:04.0 cmd <- 14f
w83627hf hwm smbus enabled
PCI: 01:04.1 subsystem <- 10f1/2881
PCI: 01:04.1 cmd <- 141
PCI: 01:04.2 subsystem <- 10f1/2881
PCI: 01:04.2 cmd <- 141
PCI: 01:04.3 subsystem <- 10f1/2881
PCI: 01:04.3 cmd <- 141
PCI: 00:18.1 subsystem <- 10f1/2881
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 10f1/2881
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
PCI: 00:19.0 cmd <- 140
PCI: 00:19.1 cmd <- 140
PCI: 00:19.2 cmd <- 140
PCI: 00:19.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 0 done.
Clearing memory 1024K - 2097152K: ------------------------------- done
CPU #0 Initialized
start_eip=0x00010000
Initializing CPU #1
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 1 done.
CPU #1 Initialized
start_eip=0x00010000
Initializing CPU #2
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 2 done.
Clearing memory 2097152K - 5242880K: ----------------++++++++++++++++ done
CPU #2 Initialized
start_eip=0x00010000
Initializing CPU #3
Waiting for 1 CPUS to stop
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 3 done.
CPU #3 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 01:01.0 init
PCI: 02:09.0 init
PCI: 02:09.1 init
PCI: 01:03.0 init
PCI: 04:05.0 init
PCI: 04:06.0 init
PCI: 01:04.0 init
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
enabling HPET @0xfed00000
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
PNP: 002e.b init
PCI: 01:04.1 init
IDE1 IDE0 PCI: 01:04.3 init
set power on after power fail
smbus: PCI: 01:04.3[0]->I2C: 01:2d init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:19.0 init
PCI: 00:19.1 init
PCI: 00:19.2 init
PCI: 00:19.3 init
NB: Function 3 Misc Control.. done.
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 000001f4
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000e10  checksum 58d9

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

    33:stream_init() - rom_stream: 0xfffc0000 - 0xfffdffff
Found ELF candiate at offset 0
Loading Etherboot version: 5.4.1
Dropping non PT_LOAD segment
New segment addr 0x10000 size 0x49160 offset 0x0 filesize 0x9c20
(cleaned up) New segment addr 0x10000 size 0x49160 offset 0x0 filesize 0x9c20
Loading Segment: addr: 0x00000000bff8c000 memsz: 0x0000000000034000 filesz: 0x0000000000009c20
Clearing Segment: addr: 0x00000000bff95c20 memsz: 0x000000000002a3e0
Loading Segment: addr: 0x0000000000044000 memsz: 0x0000000000015160 filesz: 0x0000000000000000
Clearing Segment: addr: 0x0000000000044000 memsz: 0x0000000000015160
Jumping to boot code at 0x100b0
CPU 2063 Mhz
Etherboot 5.4.1 (GPL) http://etherboot.org
Drivers: TG3 FILO   Images: NBI ELF   
Protocols: DHCP TFTP 
Relocating _text from: [000101b0,00059160) to [bfeb7050,bff00000)
Boot from (N)etwork (D)isk or (Q)uit? D

Probing pci disk...
[FILO]FILO version 0.4.1 (root at countzero.vandewege.net) Tue Jan  3 18:09:58 EST 2006
Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 
boot: hde1:/vmlinuz-2.6.12-9-amd64-generic initrd=/initrd.img-2.6.12-9-amd64-generic ro root=/dev/md3 console=tty0 console=ttyS0,115200n8
hde: LBA48: WDC WD740GD-00FLC0                      
hdf: LBA48: WDC WD740GD-00FLC0                      
Mounted ext2fs
Found Linux version 2.6.12-9-amd64-generic (buildd at king) #1 Mon Oct 10 13:27:39 BST 2005 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
[    0.000000] Bootdata ok (command line is ro root=/dev/md3 console=tty0 console=ttyS0,115200n8)
[    0.000000] Linux version 2.6.12-9-amd64-generic (buildd at king) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Oct 10 13:27:39 BST 2005
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000000e7c type 16
[    0.000000]  BIOS-e820: 0000000000000e7c - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 00000000000f0400 type 16
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] ACPI: Unable to locate RSDP
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: TYAN     <6>Product ID: S2881        <6>APIC at: 0xFEE00000
[    0.000000] Processor #0 15:1 APIC version 16
[    0.000000] Processor #1 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] Processor #2 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] Processor #3 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
[    0.000000] I/O APIC #5 Version 17 at 0xFD200000.
[    0.000000] I/O APIC #6 Version 17 at 0xFD201000.
[    0.000000] Setting APIC routing to flat
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:40000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ f8000000 size 64 MB
[    0.000000] CPU 1: aperture @ f8000000 size 64 MB
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: ro root=/dev/md3 console=tty0 console=ttyS0,115200n8
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 1.193182 MHz PIT timer.
[    0.000000] time.c: Detected 1991.609 MHz processor.
[   15.789028] time.c: Using PIT/TSC based timekeeping.
[   15.789466] Console: colour dummy device 80x25
[   16.009484] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[   16.025086] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   16.102002] Memory: 4101416k/5242880k available (1620k kernel code, 92332k reserved, 997k data, 136k init)
[   16.131881] Security Framework v1.0.0 initialized
[   16.137053] SELinux:  Disabled at boot.
[   16.141278] Mount-cache hash table entries: 256
[   16.146327] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   16.154621] CPU: L2 Cache: 1024K (64 bytes/line)
[   16.159985] CPU:  stepping 02
[   16.163541] checking if image is initramfs... it is
[   16.500658] Using IO-APIC 4
[   16.503890] Using IO-APIC 5
[   16.507108] Using IO-APIC 6
[   16.520431] Using local APIC timer interrupts.
[   16.575813] Detected 12.447 MHz APIC timer.
[   16.580685] testing NMI watchdog ... OK.
[   16.595291] NET: Registered protocol family 16
[   16.600792] PCI: Using configuration type 1
[   16.605662] mtrr: v2.0 (20020519)
[   16.609777] ACPI: Subsystem revision 20050729
[   16.614825] ACPI: Interpreter disabled.
[   16.619279] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.625858] pnp: PnP ACPI: disabled
[   16.629948] usbcore: registered new driver usbfs
[   16.635310] usbcore: registered new driver hub
[   16.640488] PCI: Probing PCI hardware
[   16.644748] PCI: Probing PCI hardware (bus 00)
[   16.651252] PCI: Discovered primary peer bus 01 [IRQ]
[   16.657113] PCI: Using IRQ router default [1022/7468] at 0000:01:04.0
[   16.664603] PCI->APIC IRQ transform: 0000:01:04.2[D] -> IRQ 19
[   16.671369] PCI->APIC IRQ transform: 0000:02:09.0[A] -> IRQ 24
[   16.678135] PCI->APIC IRQ transform: 0000:02:09.1[B] -> IRQ 25
[   16.684899] PCI->APIC IRQ transform: 0000:04:00.0[D] -> IRQ 19
[   16.691684] PCI->APIC IRQ transform: 0000:04:00.1[D] -> IRQ 19
[   16.698441] PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 17
[   16.705205] PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 18
[   16.712023] PCI-DMA: Disabling AGP.
[   16.716116] PCI-DMA: aperture base @ f8000000 size 65536 KB
[   16.722570] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   16.730353] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   16.738906] audit: initializing netlink socket (disabled)
[   16.745160] audit: initialized
[   16.748789] VFS: Disk quotas dquot_6.5.1
[   16.753340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   16.760849] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[   16.768036] devfs: boot_options: 0x0
[   16.772212] Initializing Cryptographic API
[   16.776971] PCI: MSI quirk detected. pci_msi_quirk set.
[   16.783022] PCI: MSI quirk detected. pci_msi_quirk set.
[   16.803174] Linux agpgart interface v0.101 (c) Dave Jones
[   16.809515] PNP: No PS/2 controller found. Probing ports directly.
[   16.818289] serio: i8042 AUX port at 0x60,0x64 irq 12
[   16.824205] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.829965] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   16.839199] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.846317] io scheduler noop registered
[   16.850899] io scheduler anticipatory registered
[   16.856246] io scheduler deadline registered
[   16.861220] io scheduler cfq registered
[   16.865936] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   16.874765] NET: Registered protocol family 2
[   16.889556] IP: routing cache hash table of 65536 buckets, 512Kbytes
[   16.897361] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[   16.909069] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   16.917142] TCP: Hash tables configured (established 524288 bind 65536)
[   16.924890] NET: Registered protocol family 8
[   16.929946] NET: Registered protocol family 20
[   16.935254] Freeing unused kernel memory: 136k freed
Loading, please wait...
Begin: Loading modules ...
[   16.961226] input: AT Translated Set 2 keyboard on isa0060/serio0
[   16.970128] Capability LSM initialized
[   16.982946] NET: Registered protocol family 1
[   16.999595] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   17.006968] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   17.021176] AMD8111: IDE controller at PCI slot 0000:01:04.1
[   17.027770] AMD8111: chipset revision 3
[   17.032208] AMD8111: not 100% native mode: will probe irqs later
[   17.039170] AMD8111: 0000:01:04.1 (rev 03) UDMA133 controller
[   17.045853]     ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:pio, hdb:pio
[   17.054257]     ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:pio, hdd:pio
[   18.195137] hdd: CD-224E, ATAPI CD/DVD-ROM drive
[   18.251509] ide1 at 0x170-0x177,0x376 on irq 15
[   20.826116] hdd: ATAPI 24X CD-ROM drive, 128kB Cache
[   20.831922] Uniform CD-ROM driver Revision: 3.20
[   21.084960] tg3.c:v3.31 (June 8, 2005)
[   21.093457] eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:24
[   21.106983] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] 
[   21.116663] eth0: dma_rwctrl[769f4000]
[   21.131439] eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:25
[   21.145003] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[   21.154707] eth1: dma_rwctrl[769f4000]
[   21.167480] ohci_hcd 0000:04:00.0: Advanced Micro Devices [AMD] AMD-8111 USB
[   21.175810] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[   21.184402] ohci_hcd 0000:04:00.0: irq 19, io mem 0xfd000000
[   21.243617] hub 1-0:1.0: USB hub found
[   21.247983] hub 1-0:1.0: 3 ports detected
[   21.255572] ohci_hcd 0000:04:00.1: Advanced Micro Devices [AMD] AMD-8111 USB (#2)
[   21.264281] ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2
[   21.272849] ohci_hcd 0000:04:00.1: irq 19, io mem 0xfd001000
[   21.331560] hub 2-0:1.0: USB hub found
[   21.335922] hub 2-0:1.0: 3 ports detected
[   21.353597] SCSI subsystem initialized
[   21.360029] ata1: SATA max UDMA/100 cmd 0xFFFFC20000014080 ctl 0xFFFFC2000001408A bmdma 0xFFFFC20000014000 irq 17
[   21.371953] ata2: SATA max UDMA/100 cmd 0xFFFFC200000140C0 ctl 0xFFFFC200000140CA bmdma 0xFFFFC20000014008 irq 17
[   21.383881] ata3: SATA max UDMA/100 cmd 0xFFFFC20000014280 ctl 0xFFFFC2000001428A bmdma 0xFFFFC20000014200 irq 17
[   21.395817] ata4: SATA max UDMA/100 cmd 0xFFFFC200000142C0 ctl 0xFFFFC200000142CA bmdma 0xFFFFC20000014208 irq 17
[   21.762751] ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   21.771110] ata1: dev 0 configured for UDMA/100
[   21.776357] scsi0 : sata_sil
[   22.134595] ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   22.142925] ata2: dev 0 configured for UDMA/100
[   22.148172] scsi1 : sata_sil
[   22.506431] ata3: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   22.514789] ata3: dev 0 configured for UDMA/100
[   22.520054] scsi2 : sata_sil
[   22.878265] ata4: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   22.886625] ata4: dev 0 configured for UDMA/100
[   22.891888] scsi3 : sata_sil
[   22.895300]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   22.902593]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   22.911474]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   22.918766]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   22.927652]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   22.934968]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   22.943852]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   22.951164]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   24.976733] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   24.984417] SCSI device sda: drive cache: write back
[   24.990223] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   24.997882] SCSI device sda: drive cache: write back
[   25.003646]  /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
[   25.022643] Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
[   25.029931] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   25.037608] SCSI device sdb: drive cache: write back
[   25.043406] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   25.051087] SCSI device sdb: drive cache: write back
[   25.056833]  /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4
[   25.077402] Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
[   25.084688] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
[   25.092375] SCSI device sdc: drive cache: write back
[   25.098180] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
[   25.105836] SCSI device sdc: drive cache: write back
[   25.111591]  /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
[   25.128052] Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
[   25.135323] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB)
[   25.143009] SCSI device sdd: drive cache: write back
[   25.148804] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB)
[   25.156485] SCSI device sdd: drive cache: write back
[   25.162241]  /dev/scsi/host3/bus0/target0/lun0: p1 p2 p3 p4
[   25.181580] Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0
Done.
Begin: Initializing /dev ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/thermal.ko): No such device
Done.
Begin: Mounting root file system ...
Begin: Running /scripts/local-top ...
[   25.540318] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   25.550112] md: raid1 personality registered as nr 3
[   25.565836] raid5: automatically using best checksumming function: generic_sse
[   25.578673]    generic_sse:  6040.000 MB/sec
[   25.583639] raid5: using function: generic_sse (6040.000 MB/sec)
[   25.591334] md: raid5 personality registered as nr 4
[   25.927657] devfs_mk_dev: could not append to parent for md/0
[   25.936162] md: md0 stopped.
[   25.940462] md: bind<sdb1>
[   25.943738] md: bind<sdc1>
[   25.946990] md: bind<sdd1>
[   25.950255] md: bind<sda1>
[   25.953462] raid1: raid set md0 active with 4 out of 4 mirrors
mdadm: /dev/md0 has been started with 4 drives.
[   25.967558] devfs_mk_dev: could not append to parent for md/1
[   25.976102] md: md1 stopped.
[   25.980400] md: bind<sdb2>
[   25.983674] md: bind<sdc2>
[   25.986936] md: bind<sdd2>
[   25.990189] md: bind<sda2>
[   25.993342] raid5: device sda2 operational as raid disk 0
[   25.999618] raid5: device sdd2 operational as raid disk 3
[   26.005887] raid5: device sdc2 operational as raid disk 2
[   26.012143] raid5: device sdb2 operational as raid disk 1
[   26.018818] raid5: allocated 4270kB for md1
[   26.023664] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
[   26.032562] RAID5 conf printout:
[   26.036311]  --- rd:4 wd:4 fd:0
[   26.039959]  disk 0, o:1, dev:sda2
[   26.043909]  disk 1, o:1, dev:sdb2
[   26.047860]  disk 2, o:1, dev:sdc2
[   26.051794]  disk 3, o:1, dev:sdd2
mdadm: /dev/md1 has been started with 4 drives.
[   26.067231] devfs_mk_dev: could not append to parent for md/2
[   26.075803] md: md2 stopped.
[   26.080070] md: bind<sdb3>
[   26.083343] md: bind<sdc3>
[   26.086620] md: bind<sdd3>
[   26.089893] md: bind<sda3>
[   26.093060] raid5: device sda3 operational as raid disk 0
[   26.099310] raid5: device sdd3 operational as raid disk 3
[   26.105575] raid5: device sdc3 operational as raid disk 2
[   26.111844] raid5: device sdb3 operational as raid disk 1
[   26.118514] raid5: allocated 4270kB for md2
[   26.123352] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
[   26.132249] RAID5 conf printout:
[   26.135982]  --- rd:4 wd:4 fd:0
[   26.139635]  disk 0, o:1, dev:sda3
[   26.143570]  disk 1, o:1, dev:sdb3
[   26.147529]  disk 2, o:1, dev:sdc3
[   26.151469]  disk 3, o:1, dev:sdd3
mdadm: /dev/md2 has been started with 4 drives.
[   26.170930] devfs_mk_dev: could not append to parent for md/3
[   26.179527] md: md3 stopped.
[   26.183835] md: bind<sdb4>
[   26.187109] md: bind<sdc4>
[   26.190370] md: bind<sdd4>
[   26.193633] md: bind<sda4>
[   26.196791] raid5: device sda4 operational as raid disk 0
[   26.203049] raid5: device sdd4 operational as raid disk 3
[   26.209313] raid5: device sdc4 operational as raid disk 2
[   26.215584] raid5: device sdb4 operational as raid disk 1
[   26.222267] raid5: allocated 4270kB for md3
[   26.227125] raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
[   26.236029] RAID5 conf printout:
[   26.239771]  --- rd:4 wd:4 fd:0
[   26.243427]  disk 0, o:1, dev:sda4
[   26.247395]  disk 1, o:1, dev:sdb4
[   26.251354]  disk 2, o:1, dev:sdc4
[   26.255294]  disk 3, o:1, dev:sdd4
mdadm: /dev/md3 has been started with 4 drives.
Done.
Begin: Running /scripts/local-premount ...
[   26.282462] Attempting manual resume
[   26.286764] swsusp: Suspend partition has wrong signature?
Done.
[   26.314393] kjournald starting.  Commit interval 5 seconds
[   26.320772] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
 * version 2.86 booting
 * Starting RAID devices...        [ ok ]
 * Starting hardware event daemon...        [ ok ]
 * Creating initial device nodes...        [ ok ]
 * Setting disc parameters...        [ ok ]
[   28.695254] Adding 8795320k swap on /dev/md2.  Priority:-1 extents:1
 * Checking root file system...        /: clean, 64494/25378816 files, 1048481/50743248 blocks
[ ok ]
[   28.797027] EXT3 FS on md3, internal journal
 * Initializing modules...        [ ok ]
 * Cleaning up ifupdown...        [ ok ]
 * Calculating module dependencies...        [ ok ]
 * Loading modules...        [   30.288337] lp: driver loaded but no devices found
[   30.307846] mice: PS/2 mouse device common for all mice
[   30.361307] Real Time Clock Driver v1.12
[ ok ]
 * Setting the system clock...        [   30.737620] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
[   31.048255] ts: Compaq touchscreen protocol output
[ ok ]
[   32.962431] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
 * Setting up LVM Volume Groups...        [ ok ]
 * Starting Enterprise Volume Management System...        [   33.450594] hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
[   33.459629] hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[   33.469122] ide: failed opcode was: unknown
[   33.474623] cdrom: open failed.
[ ok ]
 * Checking all file systems...        /boot: clean, 30/32064 files, 16118/64128 blocks
/tmp: clean, 11/732960 files, 55826/1463856 blocks
[ ok ]
 * Mounting local filesystems...        [   34.160015] kjournald starting.  Commit interval 5 seconds
[   34.167366] EXT3 FS on md0, internal journal
[   34.172313] EXT3-fs: mounted filesystem with ordered data mode.
[   34.179498] kjournald starting.  Commit interval 5 seconds
[   34.187118] EXT3 FS on md1, internal journal
[   34.192088] EXT3-fs: mounted filesystem with ordered data mode.
/dev/md0 on /boot type ext3 (rw)
/dev/md1 on /tmp type ext3 (rw)
[ ok ]
 * Restoring resolver state...        [ ok ]
 * Setting up networking...        [ ok ]
 * Starting hotplug subsystem...        [ ok ]
 * Configuring network interfaces...        [ ok ]
 * Waiting for network interface to come up...        [   38.131168] NET: Registered protocol family 17
[   39.716558] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   39.723012] tg3: eth0: Flow control is on for TX and on for RX.


[ ok ]
 * Setting up ALSA...        [ ok ]
 * Setting the system clock...        [ ok ]
 * Synchronizing clock to ntp.ubuntulinux.org...        [   62.153430] NET: Registered protocol family 10
[   62.158691] Disabled Privacy Extensions on device ffffffff8035a5a0(lo)
[   62.166405] IPv6 over IPv4 tunneling driver
[ ok ]
 * Initializing random number generator...        [ ok ]
 * Entering runlevel: 2
 * Starting system log daemon...        [ ok ]
 * Starting kernel log daemon...        [ ok ]
 * Starting OpenBSD Secure Shell server...        [ ok ]
 * Starting RAID monitoring services...        [ ok ]
 * Starting deferred execution scheduler...        [ ok ]
 * Starting periodic command scheduler...        [ ok ]
 * Id "T0" respawning too fast: disabled for 5 minutes
Debian GNU/Linux ttyS0 115200 (DIRECT)
**EMSI_REQA77E              
chimera.gnu.org login: 

LinuxBIOS-1.1.8_s2881_Fallback Tue Jan  3 17:36:16 EST 2006 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02


More information about the coreboot mailing list