[LinuxBIOS] IT8718F support.

Uwe Hermann uwe at hermann-uwe.de
Tue Aug 29 18:27:47 CEST 2006


Hi, here's some code for the IT8718F. Untested, but compiles.

Please also checkin my patch at
http://www.linuxbios.org/pipermail/linuxbios/2006-August/015412.html
I think that got overlooked (or is there a technical problem with it?).

Btw, is the code for the Super IOs supposed to initialize/enable _all_
supported devices or merely COM1/COM2 and the rest gets enabled
later on?


U "I read ITE datasheets when I'm bored" we.
-- 
Uwe Hermann 
http://www.hermann-uwe.de
http://www.it-services-uh.de  | http://www.crazy-hacks.org 
http://www.holsham-traders.de | http://www.unmaintained-free-software.org
-------------- next part --------------
Index: src/superio/ite/it8718f/it8718f.h
===================================================================
--- src/superio/ite/it8718f/it8718f.h	(Revision 0)
+++ src/superio/ite/it8718f/it8718f.h	(Revision 0)
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8718_2.asp */
+/* Status: untested on real hardware, but it compiles. */
+
+#define IT8718F_FDC  0x00 /* Floppy */
+#define IT8718F_SP1  0x01 /* Com1 */
+#define IT8718F_SP2  0x02 /* Com2 */
+#define IT8718F_PP   0x03 /* Parallel port */
+#define IT8718F_EC   0x04 /* Environment controller */
+#define IT8718F_KBCK 0x05 /* Keyboard */
+#define IT8718F_KBCM 0x06 /* Mouse */
+#define IT8718F_IR   0x0a /* Consumer IR */
+
Index: src/superio/ite/it8718f/Config.lb
===================================================================
--- src/superio/ite/it8718f/Config.lb	(Revision 0)
+++ src/superio/ite/it8718f/Config.lb	(Revision 0)
@@ -0,0 +1,2 @@
+config chip.h
+object superio.o
Index: src/superio/ite/it8718f/it8718f_early_serial.c
===================================================================
--- src/superio/ite/it8718f/it8718f_early_serial.c	(Revision 0)
+++ src/superio/ite/it8718f/it8718f_early_serial.c	(Revision 0)
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/romcc_io.h>
+#include "it8718f.h"
+
+/* The base address is 0x2e or 0x4e, depending on config bytes. */
+#define SIO_BASE                     0x2e
+#define SIO_INDEX                    SIO_BASE
+#define SIO_DATA                     SIO_BASE+1
+
+/* Global Configuration Registers. */
+#define IT8718F_CONFIG_REG_CC        0x02 /* Configure Control (write-only). */
+#define IT8718F_CONFIG_REG_LDN       0x07 /* Logical Device Number. */
+#define IT8718F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
+#define IT8718F_CONFIG_REG_CLOCKSEL  0x23 /* Clock Selection. */
+#define IT8718F_CONFIG_REG_SWSUSP    0x24 /* Software Suspend, Flash I/F. */
+
+#define IT8718F_CONFIGURATION_PORT   0x2e /* Write-only. */
+
+/* The content of IT8718F_CONFIG_REG_LDN (index 0x07) must be set to the
+ * LDN the register belongs to, before you can access the register. */
+static void it8718f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
+{
+	outb(IT8718F_CONFIG_REG_LDN, SIO_BASE);
+	outb(ldn, SIO_DATA);
+	outb(index, SIO_BASE);
+	outb(value, SIO_DATA);
+}
+
+/* Enable the peripheral devices on the IT8718F Super IO chip. */
+static void it8718f_enable_serial(device_t dev, unsigned iobase)
+{
+	/* (1) Enter the configuration state (MB PnP mode). */
+
+	/* Perform MB PnP setup to put the SIO chip at 0x2e. */
+	/* Base address 0x2e: 0x87 0x01 0x55 0x55. */
+	/* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
+	outb(0x87, IT8718F_CONFIGURATION_PORT);
+	outb(0x01, IT8718F_CONFIGURATION_PORT);
+	outb(0x55, IT8718F_CONFIGURATION_PORT);
+	outb(0x55, IT8718F_CONFIGURATION_PORT);
+
+	/* (2) Modify the data of configuration registers. */
+
+	/* Select the chip to configure (if there's more than one).
+         * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
+         * If this register is not written, both chips are configured. */
+	/* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */
+
+	/* Enable all devices. */
+	it8718f_sio_write(IT8718F_FDC,  0x30, 0x1); /* Floppy */
+	it8718f_sio_write(IT8718F_SP1,  0x30, 0x1); /* Serial port 1 */
+	it8718f_sio_write(IT8718F_SP2,  0x30, 0x1); /* Serial port 2 */
+	it8718f_sio_write(IT8718F_PP,   0x30, 0x1); /* Parallel port */
+	it8718f_sio_write(IT8718F_EC,   0x30, 0x1); /* Environment controller */
+	it8718f_sio_write(IT8718F_KBCK, 0x30, 0x1); /* Keyboard */
+	it8718f_sio_write(IT8718F_KBCM, 0x30, 0x1); /* Mouse */
+	it8718f_sio_write(IT8718F_IR,   0x30, 0x1); /* Consumer IR */
+
+	/* Select 24MHz/48MHz CLKIN (set/clear bit 0). TODO: Needed? */
+	/* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CLOCKSEL, 0x00); */
+
+	/* Clear software suspend mode (clear bit 0). TODO: Needed? */
+	/* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */
+
+	/* (3) Exit the configuration state (MB PnP mode). */
+	it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CC, 0x02); 
+}
+
Index: src/superio/ite/it8718f/superio.c
===================================================================
--- src/superio/ite/it8718f/superio.c	(Revision 0)
+++ src/superio/ite/it8718f/superio.c	(Revision 0)
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include "chip.h"
+#include "it8718f.h"
+
+static void init(device_t dev)
+{
+	struct superio_ITE_it8718f_config *conf;
+	struct resource *res0, *res1;
+
+	if (!dev->enabled) {
+		return;
+	}
+
+	conf = dev->chip_info;
+
+	switch (dev->path.u.pnp.device) {
+	case IT8718F_FDC: /* TODO. */
+		break;
+	case IT8718F_SP1:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		init_uart8250(res0->base, &conf->com1);
+		break;
+	case IT8718F_SP2:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		init_uart8250(res0->base, &conf->com2);
+		break;
+	case IT8718F_PP: /* TODO. */
+		break;
+	case IT8718F_EC: /* TODO. */
+		break;
+	case IT8718F_KBCK:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		res1 = find_resource(dev, PNP_IDX_IO1);
+		init_pc_keyboard(res0->base, res1->base, &conf->keyboard);
+		break;
+	case IT8718F_KBCM: /* TODO. */
+		break;
+	case IT8718F_IR: /* TODO. */
+		break;
+	}
+}
+
+static struct device_operations ops = {
+	.read_resources   = pnp_read_resources,
+	.set_resources    = pnp_set_resources,
+	.enable_resources = pnp_enable_resources,
+	.enable           = pnp_enable,
+	.init             = init,
+};
+
+/* TODO: FDC, PP, EC, KBCM, IR. */
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, IT8718F_SP1,  PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, IT8718F_SP2,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, },
+ { &ops, IT8718F_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, },
+};
+
+static void enable_dev(struct device *dev)
+{
+	pnp_enable_devices(dev, &pnp_ops,
+		sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info);
+}
+
+struct chip_operations superio_ITE_it8718f_ops = {
+	CHIP_NAME("ITE it8718f")
+	.enable_dev = enable_dev,
+};
+
Index: src/superio/ite/it8718f/chip.h
===================================================================
--- src/superio/ite/it8718f/chip.h	(Revision 0)
+++ src/superio/ite/it8718f/chip.h	(Revision 0)
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _SUPERIO_ITE_IT8718F
+#define _SUPERIO_ITE_IT8718F
+
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+extern struct chip_operations superio_ITE_it8718f_ops;
+
+struct superio_ITE_it8718f_config {
+	struct uart8250 com1, com2;
+	struct pc_keyboard keyboard;
+};
+
+#endif /* _SUPERIO_ITE_IT8718F */
+
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060829/73939002/attachment.sig>


More information about the coreboot mailing list