[LinuxBIOS] GA-6BXC - cont'd
Uwe Hermann
uwe at hermann-uwe.de
Fri Aug 11 20:09:31 CEST 2006
Hi,
here's the output I get when running LinuxBIOS ony my GA-6BXC board,
using the fixed IT8671F code from svn, and an almost unmodified bitworks/ims
code.
I have 3 RAM slots (all used); does the output look good? Where should I
continue now? One thing I'll have to figure out is to build a payload
which prints some stuff to the serial port, so I know that the payload
is reached.
The monitor stays black, which code do I need to touch to get VGA
output?
Cheers, Uwe.
--
Uwe Hermann
http://www.hermann-uwe.de
http://www.it-services-uh.de | http://www.crazy-hacks.org
http://www.holsham-traders.de | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: minicom.cap
Type: application/cap
Size: 2763 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060811/221c1f1e/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060811/221c1f1e/attachment.sig>
More information about the coreboot
mailing list