[LinuxBIOS] GA-6BXC - first try.

Ronald G. Minnich rminnich at lanl.gov
Tue Aug 1 00:39:46 CEST 2006

>> 5. ./buildtarget bitworks/ims
>> 6. cd bitworks/ims/ims
>> 7. make
> IMS uses a NSC pc87351 for the super IO.
> Make sure you change the SuperIO to match your board.  Or you won't
> get any output.
> Remember that if it "works" all you are going to get is a dump of the
> SPD, some messages on copying and jumping to RAM and then it will
> crash.  Everthing else is  on the ToDo list. :)
>> 9. sudo ../../../util/flashrom/flashrom -w linuxbios.rom
>> Calibrating delay loop... ok
>> No LinuxBIOS table found.
>> No EEPROM/flash device found.

I'm guessing the write enable did not happen.

you can'd ID flash without write cycles working.


More information about the coreboot mailing list