[LinuxBIOS] Linuxbios Tyan S2882D
Ronald G Minnich
rminnich at lanl.gov
Sun Apr 30 05:41:34 CEST 2006
Hidasi Jozsef wrote:
> Dear List!
>
> I've compiled the BIOS for Tyan S2882D dual Opteron system, I've
> dumped the original videobios (it has good signature:) but seems the
> BIOS doesn't start it! The other problem is that when I load a kernel
> the system simply restarts no output at all. May the absense of the
> videobios cause this? My last message is "Jumping to the entry point"
> The kernel works fine with the original AMI :( BIOS! The FILO and
> Etherboot (via network) also does the same! Does anybody have a good
> linuxbios config for this motherboard? a working binary is welcome
> too :) I would like to find the problem, but it would be to use
> failback code instead of flashing the whole chip once and once:)
>
>
>
build a serial-only kernel. Enable early printk.
Boot the kernel with this
hda1:/vmlinuz console=ttyS0,115200 earlyprintk=ttyS0,115200,keep
send us the output.
ron
More information about the coreboot
mailing list